• Title: STOCK ROM ACER Liquid E700 Trio –Ported to –EVERTEK EVERFANCY III
  • Listed: 08/30/2015 5:08 am
  • ROM Version:ROM Android 4.4.2 - rooted
  • You must be logged for ROM download.

Overall Rating : 7

13502 total views, 23 today

5 Total favorites

2292 Total downloads


EVERTEK EVERFANCY IIIAcer Liquid E700 TrioAcer Liquid E700 TrioAcer Liquid E700 Triodisable Driver Signature Verification on 64-Bit Windows 8.1 or 10disable Driver Signature Verification on 64-Bit Windows 8.1 or 10disable Driver Signature Verification on 64-Bit Windows 8.1 or 10disable Driver Signature Verification on 64-Bit Windows 8.1 or 10disable Driver Signature Verification on 64-Bit Windows 8.1 or 10SPFlash Scatter Rom Acer AV0K0 E39 1.022.00 EMEA CUS1 - Evertek EVERFANCY III

Author adMember Info



                        STOCK ROM ACER Liquid E700 Trio

                             Ported to 

                                 EVERTEK EVERFANCY 3


Acer Rom is another wonderful rom that everybody cannot wait for.

Here is another elegant Rom from unmodified system dump from

Acer E39 / E700fully ported to EVERTEK EVERFANCY III

Android kitkat 4.4.2  - rooted





2 New Romsto download, update.zip, with "Philz touch recovery"   : Stock Rom Acer Liquid E700 TrioPorted to Evertek EVERFANCY III & Stock Rom Evertek Everfancy III L.108 2015-08-29 (*)seebelow for procedure to upgrade.



Posted, [Fixed update2, 2015-08-27,SPFlash Tool]STOCK ROM ACER Liquid E700 Trio - Ported to - EVERTEK EVERFANCY III 


Hardware : MT6582

Model : Acer E39 –E700 ported to EVERTEK-EVERFANCY III –L108

Build number : Acer_AV0K0_E39_1.022.00_EMEA_CUS1

Build date UTC : 20150204-105321

Android  v : 4.4.2

Baseband v:MOLY.WR8.W1315.MD.WG.MP.V47, 2014/08/12 20:21

Kernel v : 3.4.67 (jenkins@jenkins216) (gcc version 4.7 (GCC) ) #1 SMP  Thu Jun 4 14:59:19 CST 2015


 Firstmake root, andbackup your nvram which serve to fix, wifi and 3G problems, after upgrade.


After update, you need to restore your nvram andperform a factory reset (*) ,then restore yourbackup userdata file.

Hard Reset is a fast and easy way to wipe all of your personal data from your device and make it 100% clean :) 


Tutorial Upgrade 1:

Before flashing Evertek Everfancy 3, it must be made a BackupNvram

it will serve to the end of flashing operation to retrieve data nvram wifi and 3G

Follow these steps :

1) install the last usb drivers phone :

 - UniversalAdbDriverSetup.msi

 - Usb_Vcom_Auto_Installer_v1.1236.00 or Usb_Vcom.8.1.win10

(you needto disable Driver Signature Verification on 64-Bit Windows 8.1 or 10) see procedure below (*)

 - install iRoot_1.7.9

2) Enable the USB debugging

3) root your phone, with software : iRoot_1.7.9.10454_cid1005_7337ba1e.

 and intall recovery(*All files available to download)

 Choose one of these prepared recovery  and flash it with SPflash tool;



     - recovery.Ever3.Philz.Touch.v.6.57.9.img

     - recovery.Ever3.TWRP.v.

And, also, you can create your custom MTK recovery by:MTK-PhilZ.setup, or TWRP. Setup


Then after, you need to install these apk files : SuperSU-file v2.46.apk , BusyBox Pro.apk and ES Explorateurde Fichiers_3.2.5.5.apk

4) Make a Backup nvram of your Everfancy 3 phone

use the file MtkDroidTools v2.5.3to do this.

First, you need to execute superuser / kinguser and BusyBox to get full root access.

5) Use the file SP_Flash_Tool_v5.1452.00 to install the new firmware Acer E700 –E39

Stock romAcer E39 (E700) AV0K0 e39 1.022.00 EMEA GEN2

Open the directory ! Files_to_FlashTool

and select the scatter file : MT6582_Android_scatter.txt

click Format and download all

6) turn offyour phone

7) connect your phone to the PC with USB cable

8) Software start the download via Usb_Vcom driver

9) At the end of the operation of flashing, wait for the time it takes for your phone to restarts

10)After the first reboot

- Run Program: MtkDroidTools v2.5.3

- and restore nvram files from your Backup nvram

- Everfancy-III_352752066027285_nvram_150527-051647.bin

- Everfancy-III_352752066027285_nvram_150527-051647.tar

then reboot, and All is well that ends well


Faithfully yours

TBS TN –Tunisia




After a Hard / Factory reset, you need to restore your nvram 3G data phone


If first, you performed a backup of your phone, with the ClockWorkMod recovery: autoCWM v5.5.0.4
you need to restore your device from a backup.

Restoring a backup :

   Boot into Recovery Mode, Select Backup and Restore
   Select Restore, wait for it to complete. and reboot system.

Otherwise it's necessary to follow the following steps:

1) Enable USB Debugging Mode On Your Android Phone Device

  Before the Developer Options menu will appear, some versions of Android now

  require that you unlock it, by tapping the secret “Build Number”unlock area.

  This is found under Settings> About Phone> Build Number

2) Run kinguser.apk and apply root authorization

3) To full root level access, re-install busybox.apk application and run it.

4) Connect your phone to your computer, open Mtk Droid Tools v2.4.5 software,

  Choose IMEI/NVRAM then Restore Nvram


You may now reboot your phone and check via *#66# and *#06#

if you now have a valid Serial Number and IMEI Numbers.



 (*) Tutorial Upgrade 2: How to boot into recovery mode ?


We need to use Recovery mode to factory reset the device, delete the cache partition, or apply software updates.

 - Hold down the Power key and select Power off.

 - Press and holdthe Power key and the Volume up (+) key.

  You should see the Android mascot on his back, a bunch of information about your device, and Start at the top right of the screen : 

   Android system recovery <3e>


 To navigate through the menu options you use :

 The Volume (+) up  and Volume down (-) keys.

 The Volume up (+) key is also, used, to make a selection.

Then, Volume up (+) / down (-) to move highlightand volume up (+) button to select.

You can always choose from:

-Rebootsystem now.

- Apply update from ADB, Sdcard and cache

- Wipe data/factory reset: this will wipe all of your data,  (photos, videos, music,

 apps, everything) and return the phone  to factory conditions ready to be setup

 all over again. It will  also wipe the cache partition.

- Wipe cache partition

- Backup user data

- Restore user datato restore user data, you need to select the file *.backup




(*) Tutorial Upgrade 3: Custom installation with Philz touch recovery?


1)install Philz recovery with SpFlash tool.

Open SPflash tool, choose "download only"option + Recovery column.

 find file : recoveryever3.Philz.Touch.v.6.57.9.img, and flash it to phone.

2) If CWM –ClockWorkMod Recovery, was installed yet, then take file

Zip_Philz.Touch.recovery.v6.57.9.zip, and install it on recovery mode.

3) Press and hold the Power (on) key and the Volume up (+) key,

then reboot into recovery mode (Philz Touch 6.57.9)

4) Choose Wipe and format options

5)Clean to install a new Rom

6) Yes, wipe user and system data,

7) thenpress any key to continue

8) return to, Install zip

9) Choose zip from /storage/sdcard1

   –Select folders: clockwordmod/custom_rom/

  - Choose the Zip file to install :         Zip_PhilzRom_Acer_AV0K0_E39_1.022.00_EMEA_CUS1_20150829_000804.zip


10) Press YesInstall Zip_PhilzRom file…

   and wait installing update…, until message box: "install from sdcard complete!", then press any key to continue.

11) Choose Reboot system now,

then press "Yes disable recovery flash", and the phone reboot.


How Backup your custom romwith Philz touch recovery?

1)Reboot into recovery mode (Philz Touch 6.57.9)

Press the Volume down (-) key to navigate down, and Volume up (+) key to navigate up

2) Go to Backup andrestore

3) Clone Rom to update.zip

4) Create from Current Rom

5) Create Rom in   /storage/sdcard1

6) Backup complete

7) Creating update.zip,

then Reboot system now




*Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10

To disable driver signature verification, we’re going to need to get into the Troubleshooting options from the boot manager.

Simply select Restart from the power options menu
(on Windows 8 that’s under Charms or on the login screen, and in Windows 10 it’s on the Start Menu).

Hold down the SHIFT key while you click Restart.

Once your computer has rebootedyou will be ableto choose theTroubleshoot option.

Then head into Advanced options.

Then Startup Settings.

Since we are modifying boot time configuration settings,

you will need to restart your Computerone last time.

Finally, you will be given a list of startup settings that you can change.

The one we are looking for is “Disable driver signature enforcement”.

To choose the setting, you will need to press the F7 key.

That’s all there is to it.

Your PC will then rebootand you will be able to installunsigned driverswithout any error message.


Donate with PayPal to najdine

Share Button

※Please make a backup of your device before installing or updating ROM

8 Responses to“STOCK ROM ACER Liquid E700 Trio –”

  1. 08/17/2015
    Posts: 1

    what about the camera problem? is it fixed?


  2. najdine

    Posts: 5

    Dear Friend

    All fixed : Factory Data reset, Warning Camera Failed error message

    and WiFi NVRAM WARNING err 0×10

    Have a nice day



  3. 05/05/2014
    Posts: 2

    nice post dude

  4. dr.mosse

    Posts: 4

    What you did is realy great Thank you very much

    Nice post Kindly, keepup the good wotk :-)

  5. 01/01/2016
    Posts: 2

    that works for my acer z200?¿?¿its urgent please.

  6. 02/27/2016
    Posts: 13

    helo ijin coba:)

  7. 05/01/2016
    Posts: 2


  8. 09/25/2014
    Posts: 1

    this rom triple sim or single sim sir

Leave a Reply

You must be logged in to post a comment.