• Title: Cherry Fuze S
  • Listed: 12/25/2015 3:54 am
  • ROM Version:4.4.2
  • You must be logged for ROM download.

Overall Rating : 1

642 total views, 1 today


Cherry Fuze S

Author adMember Info




  1. Make sure your Fuze S is not connected to the computer. Open SP Flash tool folder and run flash_tool.exe. Run it as administrator if you are using Windows 7 and above.
  2. From the main screen of SP Flash tool, click scatter-loadingbutton and navigate the scatter file from the stock ROM folder that you have downloaded earlier.
  3. Now click the download button.
  4. Connect your Cherry Mobile Fuze S into the computer while holding volume +. You should see a yellow progress bar at the bottom once the process is started. A green check icon when it finished.
  5. Boot your device, it will take several minutes until a setup wizard will appear.

Share Button

※Please make a backup of your device before installing or updating ROM

One Response to“Cherry Fuze S”

  1. 12/10/2014
    Posts: 1

    ayon po dyan sa tut nyo, di na po ba kailangan i-install yung USB VCOM driver?? TIA

Leave a Reply

You must be logged in to post a comment.