- Title: Coolpad Note 3 VIBE UI 3.0 Custom Rom
- Listed: 04/19/2016 11:39 pm
- ROM Version: 5.1.1
You must be logged for ROM download.
1136 total views, 3 today
How To Root Coolpad Note 3 & Install Custom Recovery
Coolpad Note 3 is one of the best budget smartphone for Indian users with so many features and fingerprint scanner too. Well most of us bought it on flash sale from Amazon.in and have been using it without any complaint, but yes we do need a rooted device to explore the most of it. So in this article we will learn how to root coolpad note 3 and install custom recovery like Philz Recovery/TWRP. You can even root your Coolpad Note 3 without the help of any pc/laptop and can use the simple Kingroot application and Flashify to install custom recovery.
DISCLAIMER : Rooting or Flashing Custom Recoveries/Roms can brick your device. We at Techolite do not take any kind of responsibilities if your phone doesn’t boots up or your SD card is dead. It is your sole responsibility to root or flash custom roms and recoveries and bear the loss if incurred in the process.
How To Root Coolpad Note 3 Without PC
- Copy the apk if you have downloaded on your pc to your Coolpad Note 3
- If you have downloaded it on your phone then just install it
- Now open the Kingroot Application
- Click the root button and wait for a moment
- You should get the success message of root within 1-2 minutes
- Reboot your device once
To check if your Coolpad Note 3 is rooted, download root checker application from Google playstore and check it.
How To Root Coolpad Note 3 With PC/Laptop
- SP_Driver_V2.0 and driver_setup_150313
- SP Flashtool
- Recovery – Philz Recovery/TWRP/CWM (Any one)
- Extract SP_Driver_V2.0 and driver_setup_150313 on your pc and install them and then reboot your pc/laptop
- Extract SP Flashtool on your Desktop
- Now on your Coolpad Note 3 goto Settings > About Phone and then continuously tap on Build Number until you get a message “Developer Mode Enabled”
- Go back and then you will see Developer Options under Settings and tick the USB Debugging
- Copy the SuperSu_v2.49.zip on your SD card of your Phone
- Now open the SP Flashtool folder and paste the recovery.img & MT6753_Android_scatter.txt
- In the SP Flashtool folder right click on flash_tool.exe and run as administrator
- When the SP Flash tool window opens > Click on scatter loading and select MT6753_Android_scatter.txt
- Click on Download from the top
- Now switch off your Coolpad Note 3 and then connect it to your pc/laptop using USB cable and press the Volume Up button two times. This should flash the custom recovery on your device and give a successful message on the SP Flash Tool Window
- While you have disconnected your device from the pc and kept it switched off press Volume up and Down button together for few seconds until you see the “recovery menu“
- Now select install
- Select external sd and then select SuperSu_v2.49.zip
- Reboot your device
- Now check if your device is rooted by installing root checker application from Google playstore
Coolpad Note 3 VIBE UI 3.0 Custom Rom
One more custom rom for Coolpad Note 3 after Cyanogenmod 12.1 and this time we have all the stock features of Vibe UI which is the operating system of Lenovo smartphones. The VIBE Ui 3.0 Custom rom for Coolpad Note 3 is ported from Lenovo Vibe P1m with major features working like WiFi, Bluetooth, Calls etc. You can download the VIBE UI 3.0 custom rom and flash using TWRP custom recovery.
DISCLAIMER : Rooting & Flashing is not a easy job, it requires ample knowledge and dedication. Techolite & its authors will be in no mean responsible for any loss. May it be your phone bricks or your SD card doesn’t work anymore, you are responsible for the act and all. Good Luck!
Coolpad Note 3 VIBE UI 3.0 Custom Rom
- Custom Recovery – Read the guide from here to install the custom recovery
- Custom Rom
- Take a backup of your personal data and contacts
- Keep the device charged above 70%
About The Rom
Type : VIBE UI
Author/Credits : Tapan Shah
Rom Version : 3.0
Android Version : 5.1
Size : 775 MB
Features Of The Rom
- Pre-rooted (SuperSu installed)
- Heads bar notifiction
- GPS working
- FM radio working
- Root privileges under developer option
- Quick Response
- Desk Clock
- Calculator (Scientific)
- Live Wallpapers
How to Install Coolpad Note 3 VIBE UI 3.0 Custom Rom
Step 1 : Copy the CN3_VIBE_UI_3_0_TECHOLITE.COM.zip file on your SD Card
Step 2 : Now go to TWRP recovery menu
Step 3 : Now Advance wipe & select system, data, dalvik cache, cache.
Step 4 : Go back and click Install and select CN3_VIBE_UI_3_0_TECHOLITE.COM.zip and flash
Step 5 : Reboot (first boot may take 5-8 minutes to reach the homescreen)
Boot Screen Animation
- Visit this page http://www.techolite.com/?attachment_id=35812
Steps to enter Recovery mode in Coolpad Note 3
- Press and hold the Volume Up Button + Power Button.
- When you see the Bootloader Screen, Release the Power Button + Volume Buttons pressed until you see the Recovery Screen.
※Please make a backup of your device before installing or updating ROM