***** Android Rooting/Modifying Disclaimer *****
You are making these modifications to your device. You understand that I cannot be held responsible if you do not follow directions and brick your device. You are the only person responsible if you brick your device, as you are the one choosing to modify your device. You are voiding your warranty by rooting, making modifications, and install custom roms. I encourage you to READ CAREFULLY before following along and continuing to void your warranty. You have been warned! Not following directions CAN result in a soft or hard brick. Thank you for if you read all of this!
- No FM Radio
- Screen Recorder app causing phone to reboot (please do not use the app)
Download cm-13.0-20160502-UNOFFICIAL-audi.zip and A-GAPPS 6.0.1.zip and save it under root directory in your phone's SD Card.
WARNING!! Step 4 to Step 9 will erase your Internal Storage. PLEASE BACKUP of all your files in Internal Storage (NOT SD Card) before proceed further!!
Download the Qualcomm QPST zip, and install it on your Computer. (You may restart the computer after finished installation to make sure the driver is in effect)
Power off your phone, take the battery out. Connect it with USB cable to the computer.
Press & Hold (Vol +), (Vol -) & (Power Button) while its connected to your computer until you feel its vibrate 2x times. (check at the computer taskbar and see if device calle Qualcomm CDMA Technologies MSM connected) DO NOT press FORMAT/ERASE drive if your computer prompt it. Just click cancel if the message appear.
Download the HDD Raw Copy Tool and double click it to execute the application. You can now see 'Qualcomm MMC Storage' shown in the software.
Download Lenovo_A760.imgc. Under the 'Qualcomm MMC Storage' line, there is another 'FILE' line, double click the line to select your downloaded Lenovo_A760.imgc
Once your Lenovo_A760.imgc selected, it will display 'Please select TARGET' message. Click the 'Qualcomm MMC Storage' line and click the Continue>> button
Click START and confirm to continue the process. This will take up to 20minutes.
Once it shows 100% complete, you may remove the phone from USB cable, and insert back the battery. DO NOT power it yet.
Press & Hold (Vol +), (Vol -) & (Power Button) to go to Recovery Mode. Once you are in TWRP recovery, press ‘Wipe’, and swipe to proceed wipe/factory reset.
Press 'Install' and select your cm-13.0-20160502-UNOFFICIAL-audi.zip.
Swipe to Install your zip. Press ‘Reboot system’ at the bottom.
Voila! you will be greeted with Cyanogenmod Boot Animation. Please proceed with the necessary steps to setup your phone for first time.
Once booted up, go to Settings, scroll down until ‘About phone’. Tap on ‘Build Number’ for few times until a message appear: ‘You have enabled development settings!’.
Go back once, and tap on ‘Developer options’. Turn on ‘Advanced reboot’ in Developer options, and scroll down a bit to set ‘Root access’ to ‘Apps and ADB’.
The following steps are only for those of you who want to install Google Apps:
Press & Hold the Power button, select Reboot, and then select ‘Recovery’
In the Recovery, press 'Install' and select your A-GAPPS 6.0.1.zip. Swipe to Install your zip. Once finished, just Press the ‘Wipe dalvik/cache’ button at bottom. After that, press ‘Reboot system’ again.
If you are facing the ‘Unfortunately Setup Wizard Has Stopped’ or ‘Unfortunately Google Play Services Has Stopped’ errors, you may follow this steps:
For Setup Wizard, go settings, scroll down to ‘Memory’ > ‘Memory used by apps’ > ‘Setup Wizard’ > (Press i in the circle) > ‘Permissions’ > Turn on the options for ‘Contacts’ & “Phone’
- For Google Play services, go settings, scroll down to ‘Memory’ > ‘Memory used by apps’ > ‘Google Play services’ > (Press i in the circle) > ‘Permissions’ > Turn on all the options
Donate with PayPal to nexbux