Ulefone
  • Title: Doogee Y100 Plus
  • Listed: 12/04/2016 12:39 am
  • ROM Version: ROM Android 5.1
  • You must be logged for ROM download.



Overall Rating : 6

2914 total views, 1 today

4 Total favorites


  

Doogee Y100 Plus

Author adMember Info

SoCr@Te

  • Listed by: SoCr@Te
  • Member Since: 05/15/0470

DESCRIPTION


ROM Phone Doogee Y100 Plus - ROM Android 5.1

ONLY MT6735M

Update Official ROM Doogee Y100 Plus version: DOOGEE-Y100_Plus-Android5.1-20161130

mt6735m_n316b_a38bs_daoge_cc_128gbitp16d3_lp1_lte_3m-fdd-cs_mul – full_n316b-user 5.1 LMY47D

—————————————————————————————————————————————————————

Update Official ROM Doogee Y100 Plus version: DOOGEE-Y100_Plus-Android5.1-20151201

—————————————————————————————————————————————————————

Official ROM Doogee Y100 Plus version: DOOGEE-Y100_Plus-Android5.1-20151007

mt6735m_n316b_a38bs_daoge_cc_128gbitp16d3_lp1_lte_3m-fdd-cs_mul – full_n316b-user 5.1 LMY47D

Gapps include – No Rooted

Language support: Multilang

 

Install ROM:

Install with SP MDT:

1). Turn off the smartphone. Cable is not connected to the computer.

2). Remove the battery and insert it again

3). Connect your phone to a computer cable. The operating system detects a new device

4). Disconnect the cable from the computer.

5). Run SPMultiPortFlashDownloadProject.exe

6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

7). Click Scatter File and select the MT6735M_Android_scatter.txt file (it's in the folder with the rom).

8). Click "Start all".

9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,

 remove and insert the battery (if the battery is removable) and reconnect it to the computer.

10). After (OK) click Stop and disable any phone.

11). Completed.


Share Button

※Please make a backup of your device before installing or updating ROM


3 Responses to“Doogee Y100 Plus”







  1. 04/29/2016
    Posts: 1

    Hi,

    Rom works fine but the file checksum.ini is missing and you get an error from the two mediatek flash tools.

    You can genereate checksum.ini with a command line tool like checksum_generate.exe (included with 'Multi Port Flash Download') or similar.

    You can also use 'SP Flash Tool' from spflashtool.com. Here you can also find driver installers for windows. I found this tool easier than Multi Port Flash Download. There are several tutorials in YouTube.

    Before flashing check that your phone is detected by windows.

    Good look and good flashing! :-)

    Hoch.





  2. 07/14/2016
    Posts: 1

    hola, alguien me podria decir como flashearlo. no me reconoce el cel :( saludos





    • 07/29/2016
      Posts: 2

      used above "update"download file and used sp flash tools along with mtk vcom drivers and turned my glass coffee coaster into a fully working phone!…good work keep it up!

       


Leave a Reply

You must be logged in to post a comment.

banner