Ulefone
  • Title: Marsapa rom v6
  • Listed: 02/21/2014 2:39 pm
  • ROM Version:4.2.2
  • You must be logged for ROM download.



Overall Rating : 39

23589 total views, 1 today

959 Total downloads

  

Marsapa rom v6

Author adMember Info

marsapa


DESCRIPTION


V6

Based on the stock in March;) 

changelog: 
everything of 5.1, with the exception of the room lenovo which you can download from here http://forum.xda-developers.com/showthread.php?t=2391694, based on the latest firmware from me deodexato, with improvements to the microphone and the GPS 
Xoposed installer and Gravitybox to activate. 

download link: https://mega.co.nz/ #! 3c4E2IhZ! nWy1eqtWbNVsUvFd75ctSTp9k30KThQWWSB1keVKUwk

 

V5 
Rom based on stock 

1) deodex; 
2) zippalign; 
3) busybox; 
4) Xposed framework; 
5) Gravitybox; 
6) fix the microphone; 
7) GPS fix; 
8) lenovo supercamera; 
9) sony walkam player; 
10) Viper4android FX; 
11) pre-root; 
12) App updated; 
13) 3d compass. 

finally in this version, based on the stock and therefore the possibility of using the flip cover, I managed to run Xposed framework and Gravitybox in pùI got an acceptable result of the microphone. 
The GPS is set to Italy, and then downloaded from the market faster gps and set the gps.conf for your country.

recovery through a typical installation, perform all wipe before installing Asthe is devoid of flavor that I think installaer to implement later.

link download : https://mega.co.nz/#!mVJX2YqK!JiO_SFM8p4iyVfYb8NZadIyEVF9VR29jozH97WZ8Ehk

 

V4

Porting di altro 6592, quindi per zopo italia invalida la garanzia, ma ragazzi vi assicuro che risolve i problemi della tastiera ed altri.



changelog:

1) prek@- root ;

2)busibox;

3)zippalign;

4)Durante l'installazione con Aroma vi èla possibilitàdi installare fino a 5 launcher , varie app e le impostazioni gps pe ril proprio continente;

5)Xposed framework (funzionate ma da attivare)IT'S OK

6)Gravitybox (funzionate ma da attivare); IT'S OK

7)sony walkam player;

8)compass marine;

9)new default wallpaper;



fix NFC da flashare senza wipe in recovery : https://mega.co.nz/#!7URTVQxZ!Y5E8gm…UqFAG3V6UXj0Fs

 

V3 
Installing assisted with Aroma 
changelog: 
1) based on the fw of 18/02/2014 with which 'was placed microphone and battery percentage, 2) Installation with Aroma, with possibility'of the breakdown of the internal memory at 7:13 gb, install the GPS config own continent, the choice between 5 launcher (only work with the stock air gesture) and opportunity 'to install many app: 
3) Pre Root; 
4) Busibox; 
5) Zippalign; 
6) google bootanimation as well; 
7) Sony walkamn player; 
8) Xposed framework, Gravitybox, xblast and xbattery (if activated can create random reboots); 
9) Removed app written Chinese and Chinese; 
10) Replaced compass app; 
11) New default wallpaper: 
12) blue LED notifications.

installation: 
Download the rom 
copy it to the phone memory or SD memory; 
Get into recovery and wipe the launch without installing the rom; 
follow the directions for installation 
At the end if you have the 6030 or the TWRP recovery cmw the phone will reboot 'alone, come out'aroma installer and back into recovery will show 'the robot upside down, a sign that is not'successful reboot, do not worry you only have to make the manual restart.

It should be noted that xpodesd framework and modules are not yet stable on soc 6592, if activated could generate random reboots

info: http://gizchina.it/2014/02/gizrom-nuova-gizchina-rom-per-zopo-zp998-octacore-marsapa-v3/

 

V2
Installazione via recovery cwm o twrp.

Change Log GizChina.it ROM per Zopo ZP998 octacore Marsapa V2

Android 4.2.2 stock;

risolto bug microfono;

zipalign;

pre-root;

xposed isntaller( da attivare);

vari moduli xposed;

sony wallkam;

Lenovo super camera.

The room lenovo has problems but being a simple app you can uninstall it and if you want you can install this newer that does not seem to cause problems: https://mega.co.nz/#!6UxiSDSK!j8c96G_pd5ybwjU9GyB114IxUrk8QB788mSZGI_ ohv4

Here is the procedure to activate Xposed and modules: 
Start Xposed installer; 
framework and then click on Install / Upgrade; 
go back, go to modules and remove the check in Gravitybox (if any) and put it on other modules; 
restart; 
open the app and Xbattery xblast and make your choices.

 

Gizchina in the article is well written that you should never turn creates Gravitybox as well as some forms of restarts, in fact I have included three modules tested that did not cause problems.

Guys this is an early version of the rom, which has a different system than the above, I solved the problem of the microphone and Xposed works fine but only with certain other forms, such as the Gravitybox generates random reboot. Now if you turn the gravity and then the disabled will continue to have to reboot. I put that module just hoping that in the future there are aggironamenti but with xblast tool will do the same thing as gravity. 
I hope I explained.


info per installazione/utilizzo: http://gizchina.it/2014/01/gizchina-rom-per-zopo-zp998-octacore-marsapa-v2/

V1

Prior to the new rom octa-core Zopo 
The rom is based on stock, pre root, walkam sony, xperia bootanimation and new default wallpaper. 
With the rom you also install the cwm recovery so the next rom will be installed from recovery.

to install the rom you have to use this sp compulsory flash tools: Here

guide to install the rom with sp flash tool: Here


Donate with PayPal to marsapa

Share Button

※Please make a backup of your device before installing or updating ROM


167 Responses to“Marsapa rom v6”







  1. 04/17/2013
    Posts: 35

    tried many time but never succeded.

    each time it deletes my IMEI's and damage the phone.
     
    has to come back to stock rom and install another rom.




  2. 01/01/2014
    Posts: 5

    Download link is V.1 !!!
     





  3. 05/06/2013
    Posts: 81

    Try the second link, this one points to V2: https://mega.co.nz/#!WZYUmCBB!73E0mm3pNDSUFcOLFbSH-RXIhNtfEaqxfN_e66R2R_E





  4. 01/27/2014
    Posts: 17

    Can you please tell me where to find xposed framework that works with zp998?
    Thanks

    • marsapa




      04/25/2013
      Posts: 193

      Here is the procedure to activate Xposed and modules: 
      Start Xposed installer; 
      framework and then click on Install / Upgrade; 
      go back, go to modules and remove the check in Gravitybox (if any) and put it on other modules; 
      restart; 
      open the app and Xbattery xblast and make your choices.





  5. 05/06/2013
    Posts: 81

    Xposed framework is integrated in this ROM. Just click and activate it. Worked for me.





    • 02/13/2013
      Posts: 106

      i just try it an updatede the moduele wen soft reboot the phone hang needed to reflash my rom





  6. 01/27/2014
    Posts: 17

    I activated xposed but phone becomes unstable with random reboots.





  7. 01/01/2014
    Posts: 5

    Confirm. After activation Xposed and Gravitybox get many soft reboot and many program crash. ROM is unstable for me…Other Xposed modules not work in my phone. Battery mod get crash on System PIConfirm.





  8. 01/30/2014
    Posts: 34

    unstable like hell….

    at least with gravity turned on

    i apply a backup i made and …still got the gizchina boot logo :/

    how can i have the default logo back ???





  9. 02/13/2013
    Posts: 106

    flash logo.bin





  10. 04/17/2013
    Posts: 35

    unstable even after deactivating and removing GravityBox.

     
    maybe it is the Rom or maybe it is Xposed Framework.
     
     

Leave a Reply

You must be logged in to post a comment.

banner