Globex GU701R – Android 4.2.2 (new rev)
1 Download and save the file to your desktop PC firmware «update.img».
2 Download and run on your PC program «RKBatchTool.exe».
3 In the active window of the program «RKBatchTool» perform the following steps:
3.1 Click the icon of the "three points" and select the file by selecting «update.img» from a folder on your PC, click the icon to "open"
3.2 Turn off the tablet (by a long press on the power button and selecting the appropriate option when prompted), connect the tablet via cable «mini USB-USB» to your PC, the hold on the tablet press Vol +.
In Windows, you are prompted to install the driver for the new device. Download and install to your PC USB -Drivers archive «Rockchip usb driver». This is necessary to ensure that your PC has seen the tablet. In connection with a bunch of questions on installing the driver, be sure to read the instruction "Installing Drivers for Win7».
If the connection to the PC is successful, the icon of "1" in the active window of the program «RKBatchTool» must "go green"
3.3 Release the power button on the tablet, press the icon «Upgrade», to start the firmware update process. The tablet should not be used during the upgrade process !!! Update information will be displayed in the status update
3.4 The system will be successfully updated if the status bar appears
The tablet will turn on automatically (if not switched on manually run).
3.5 Disconnect the USB cable from the computer. The flash tablet completed.
The first boot after flashing the tablet may take longer (up to 5 minutes) than usual – this is normal!
Donate with PayPal to vertyha
Donate with YANDEX to vertyha