ROM CUSTOM ONLY ISWAG LEGEND MTK6582 (ORIGINAL ROM SCATTER FILE + ROOT) for use with SP Flash Tool
DETAILS HARDWARE: Quad-core 1.2GHz (MEDIATEK 6582) / 8GB ROM + 1GB RAM / DISPLAY 5,0” IPS 854×480 FWVGA / 2 CAMERA 8,0MP con flash + 1,3MP FRONT / 2 SIM / SICE 143,5 * 72 * 8,5 MM
ANDROID VERSION: KITKAT 4.4.2 MULTILANGUAJE
Root and busybox installed
Beware! Always flash the same firmware version your device originally had, otherwise it will be bricked!
- Extract the downloaded archive.
- Make sure that the MTK65xx preloader com port driver is installed.
- Also, make sure that the battery is charged up to at least 60 percent. Insufficient battery level may cause flashing abortation, which can result preloader brick.
- Turn off the phone.
- Open SP flash tool (recommended to use the attached one).
- Load the MT6582_Android_scatter file.
- Click to the "Download" button.
- Connect the turned off phone via the USB port.
- Flashing starts, which takes 2-3 minutes.
- Green circle appears, your phone has been succesfully flashed. If it doesn't power up, reset its battery by pulling it out.
Extra: This archive contains an extra unlocked bootloader image (unlocked_boot.img). By flashing this, instead of the original boot image, will allow you to root your device easily.
Important notice: This firmware has been tested and worked properly. By downloading this file, you agree to use it for your own responsibility. I will not take responsibilities for any damages occurred.
Donate with PayPal to zergnet