• Title: Lenovo S60-a 5.0.2 STOCK
  • Listed: 05/22/2016 2:15 pm
  • ROM Version:5.0.2 S60-a_S232_151021_ROW
  • You must be logged for ROM download.

Overall Rating : 20

32590 total views, 13 today

19 Total favorites

6862 Total downloads


Lenovo S60-a 5.0.2 STOCK
Lenovo S60-a 5.0.2 STOCK - Image 1Lenovo S60-a 5.0.2 STOCK - Image 2

Author adMember Info


First charge the phone battery to 100% ! (seriously u can't replace the battery or charge in another way)


Known modes:
+ connect USB on turned off phone = Download Mode (Qpst, Qfill)
Vol- + connect USB on turned off phone = Diag Mode
Vol+ + Vol- + Power Button = Lenovo Recovery (there is an option to turn off phone), this is the simplest way to turn off the phone:
hold Vol- and Vol+, hold Power and wait for reset. Chose english >Turn off


Flashing S60-W with this rom:
After flash your phone could switch to Marshall London HS-USB Diagnostics 9006in this mode first do the backup all partitions with EMMC RAW TOOL. Then you can flash with MiFlash or write partitons with emmc but first read instructions:

I've got prepared img files for QPST flash from original S60-a_S232_151021_ROW because i can't find other than OTA update.zip. This is Eruopean ROM Version for Lenovo S60.

Version info:
Lenovo S60-a Stock ROM 5.0.2


Updated from version:


This ROM will wipe all userdata!Except external SD Card.
If phone after flash won't boot up and only long vibrating long hold: VOL- and POWER BUTTON (30-120seconds). Phone should restart.It happens when you will flash from other versions loader (for example 5.0.2 ->4.4.4 or 4.4.4 ->5.0.2). Why? Because old loaders is running and you have flashed the new one so you have to restart the phone but u can't remove the battery and u have to long press PWR Button.

Warning 1:
If something went wrong and phone is long vibrating and windows see Qualcom MMC (a lot of drives) u can repair it by flashing emmc with MiFlash and then HOLd VOL- and power Button and plugin USB Cable.
(alternative u can flash manually with:
EMMCRAW_1.4.0.0.exe, firstly load partition tablegpt_main0.bin)

Warning 2:
After flash you should make factory reset. Turn off the phone, hold VOL- and push power button. Choose Factory reset (it wipe all userdata except external sdcard) and press start.

This is not necessery.

Warning 3:
First boot after flash will take up about 10 minutes. It has to prepare /data partition. Seriously not an hour but long time.

After 1hour hang u can hold VOL- and hold POWER button in the same time for 30-120seconds. Phone will reset in recovery mode. Then choose factory reset, afer factory reset phone will Power Off. Disconnect USB, phone should have black screen. Hold VOL+ and connect USB again. Phone will connect in Download Mode QDload flash it again with QFIL.

You should first backup QCN (imei etc.)! How to:

  1. Download and install QPST 2.7.422with QFIL and Qualcomm USB Drivers and LenovoUsbDriver-1.0.12.
  2. Turn off the phone. Hold Vol- button and plug-in USB Cable. (VOL- and Power Button runs something like recovery menu)
  3. There should be devices in device manager: Ports COM called:
    Lenovo HS-USB Diagnostics (COMXX)
    Lenovo HS-USB NMEA (COMXX)
    If there is no devices u have to install it manually in device manager.
  4. Choose backup MRD data (first put SD card inside)
  5. Run QFIL, check is there a correct diagnostic port COM. On the top click: Tools >QCN Backup Restore
  6. Choose path with write permission, click Backup QCN

How to flash:

Charge the phone 100% and make QCN backup! Then do the factory reset.

  1. Download and install QPST 2.7.422with QFIL and Qualcomm USB Drivers.
  2. Turn off the phone. Hold Vol+ button and plug-in USB Cable. Phone will vibrate one time, screen wil be black. This is DownloadMode.
  3. There should be device called in device management:
    Qualcomm HS-USB QDLoader 9008 (COMXX)
    In any other case u have to install drivers manually.
  4. Run QFIL.
    Click Browse…in Programmer Path and choose prog_emmc_firehose_8916.mbn
    Load XML in Download Section:
       First select RawProgram File:rawprogram0.xml
       then Select Patch File: patch0.xml
  5. Check all inputs is correct and click Downloadunder Load XML button and wait about 5 to 10 minutes:


In emergency cases:
How to reset phone from QDLOader Mode: hold power button for 30-120 seconds
other possibility: hold vol- and vol+ and pwr button (all buttons) for some time
or try hold any button and connect USB.
Another emergency: Hold VOL- and Power Button and plug in usb cable.


Warning!!! Info about chineese version Lenovo S60-w

I have sucessfully flashed this images 5.0.2 on my china S60-w version. After that phone is visible everywhere as S60-a.
System OTA update works.

You shouldn't flash back to 4.4.4 (different loaders). You can do it but sometimes u have to do reset the phone (long hold power button for 1 minute) after reflash.

But im not reposnibility of any fails, do it for you own. There is stock 4.4.4 ROM for chineese version S60-w if something went wrong: http://www.needrom.com/download/lenovo-s60-w-stock-rom/ and S60-a stock 4.4.4: http://www.needrom.com/download/lenovo-s60-a-4-4-4-stock/

Share Button

※Please make a backup of your device before installing or updating ROM

73 Responses to“Lenovo S60-a 5.0.2 STOCK”

  1. 08/31/2015
    Posts: 14

    Updated from version:
    to version:

    Do not install 227 update, wait for 231 or newer OTA Update.

    info: https://forums.lenovo.com/t5/S-and-Vibe-X-Series-Smartphones/Lenovo-S60a-firmware-S227-150806-ROW-problem/m-p/2153706/highlight/true#M7686

  2. 08/31/2015
    Posts: 14

    For now it is impossible to root lollipop, it has secure boot –setenforce is enabled. Bootloader is secured so we can't disable secure.

  3. 08/31/2015
    Posts: 14

    I update ROM to working version:
    OTA update to S331 version works, you can install it.

  4. 07/29/2013
    Posts: 1

    Thank you! Amazing! Work very well on S60-W

  5. 09/15/2015
    Posts: 1

    Thank you for your effort. Is it possible to get a german version of this ROM?

  6. 08/22/2015
    Posts: 2

    I need it also in the German language. is it possible

  7. 05/10/2015
    Posts: 3

    Thank you! Amazing! Work very well on S60-W

  8. 07/22/2013
    Posts: 14

    Thank you! Great work! Great guide! Works on S60-W, did OTA update to 331!

  9. 09/23/2015
    Posts: 2

    is it multilanguage?

    • 09/23/2015
      Posts: 1

      Available languages are (in alphabetical order): Bahasa Indonesia / Bahasa Melayu / Castina / English / Espanol / Francais / Hrvatsi / Magyar / Portugues / Romana / Slovencina / Slovenscina / Tieng Viet / Türkce / Ελληνικά / български / Russian / Srpski / Ukrainska and 6 more i cant read nor reproduce the letters :)


      Right, there is no German.

  10. 10/03/2015
    Posts: 1

    Thank you very much! Works on S60-W, OTA works too!!

Leave a Reply

You must be logged in to post a comment.