- Title: M-Horse N9000W
- Listed: 09/13/2015 9:07 pm
- ROM Version: N9000W-2015.5.28-V08-Duble CARD
You must be logged for ROM download.
4282 total views, 2 today
10 Total favorites
999 Total downloads
This is a readback backup (not factory provided) firmware for M-Horse N9000W phone. The backup is created by me, been tested, and works properly.
Flasher included in the archive.
Firmware version details:
- Build number: N9000W-2015.5.28-V08-Double CARD
- Android: 4.4.2
- Language: Multilanguage
- Root: No
Beware! Always flash the same firmware version your device originally had, otherwise it will be bricked!
- Extract the downloaded archive.
- Make sure that the MTK65xx preloader com port driver is installed.
- Also, make sure that the battery is charged up to at least 60 percent. Insufficient battery level may cause flashing abortation, which can result preloader brick.
- Turn off the phone.
- Open SP flash tool (recommended to use the attached one).
- Load the MT6582_Android_scatter file.
- Click to the "Download" button.
- Connect the turned off phone via the USB port.
- Flashing starts, which takes 2-3 minutes.
- Green circle appears, your phone has been succesfully flashed. If it doesn't power up, reset its battery by pulling it out.
Extra: This archive contains an extra unlocked bootloader image (unlocked_boot.img). By flashing this, instead of the original boot image, will allow you to root your device easily.
Important notice: This firmware has been tested and worked properly. By downloading this file, you agree to use it for your own responsibility. I will not take responsibilities for any damages occurred.
※Please make a backup of your device before installing or updating ROM