Ulefone
  • Title: Micromax Q417
  • Listed: 05/08/2016 12:07 am
  • ROM Version: ROM Android 5.1
  • You must be logged for ROM download.



Overall Rating : 2

1752 total views, 2 today

3 Total favorites


  

Micromax Q417

Author adMember Info

SoCr@Te

  • Listed by: SoCr@Te
  • Member Since: 05/15/0470

DESCRIPTION


ROM Mobile Micromax Q417- ROM Android 5.1

ONLY MT6735

Update Official Rom Micromax Q417 version: MMX_Q417_SW_L100_HW_V1.0_20160506 – full_g3558-user 5.1 LMY47D

——————————————————————————————————————————————————————-

Update Official Rom Micromax Q417 version: MMX_Q417_SW_L100_HW_V1.0_20160407 – full_g3558-user 5.1 LMY47D

——————————————————————————————————————————————————————-

Update Official Rom Micromax Q417 version: MMX_Q417_SW_L100_HW_V1.0_20160330 – full_g3558-user 5.1 LMY47D

——————————————————————————————————————————————————————-

Update Official Rom Micromax Q417 version: MMX_Q417_SW_L100_HW_V1.0_20160104 – full_g3558-user 5.1 LMY47D

——————————————————————————————————————————————————————-

Official Rom Micromax Q417 version: MMX_Q417_SW_L100_HW_V1.0_20151109 – full_g3558-user 5.1 LMY47D

Gapps include – No Rooted

Language support: Multilang

 

Install ROM :

Install with SP MDT:

1). Turn off the smartphone. Cable is not connected to the computer.

2). Remove the battery and insert it again

3). Connect your phone to a computer cable. The operating system detects a new device

4). Disconnect the cable from the computer.

5). Run SPMultiPortFlashDownloadProject.exe

6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

7). Click Scatter File and select the MT6735_Android_scatter.txt file (it's in the folder with the rom).

8). Click "Start all".

9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,

 remove and insert the battery (if the battery is removable) and reconnect it to the computer.

10). After (OK) click Stop and disable any phone.

11). Completed.


Share Button

※Please make a backup of your device before installing or updating ROM


9 Responses to“Micromax Q417”







  1. 10/15/2014
    Posts: 3

    MMX_Q417_SW_L100_HW_V1.1_20160407 is marshmallow not lollipop





  2. 05/27/2016
    Posts: 1

    Which is latest lollipop update?





  3. 05/28/2016
    Posts: 2

    I think all are good and awsome but file size is too large.

     





  4. 10/15/2014
    Posts: 3

    Where the MMX_Q417_SW_L100_HW_V1.1_20160407 update has gone?





  5. 05/28/2016
    Posts: 2

    Update Official Rom Micromax Q417 version: MMX_Q417_SW_L100_HW_V1.0_20160506 – full_g3558-user 5.1 LMY47D is bricked rom you lost your full range

    to rectify that you want to follow below steps

     

    Sometimes we need to change our smartphone MTK IMEI so be it. To do this, enter the following code from the phone application:
    * # * # 3646633 # * # *
    Thus, we enter the "EngineerMode" mode.

    Once the engineer mode, we move to the "Connectivity" option and select the "CDS Information" (Common Data Service Information) option. When selected will show us new options, which select "Radio Information".

    In this menu we will show two options:
    Phone 1
    Phone 2
    We use the first (Phone 1) to reset the IMEI 1 and the second (Phone 2) to reset the IMEI 2.

    First select a line the Phone 1. In the top option appears with the command:
    AT+
    In this line we would have to write the command to change the IMEI:
    AT+EGMR=1,7, "IMEI-A-ASSIGN"
    The problem is that if we do well, sending the command, the application will give the following error:
    "This AT command is not valid for UserBuild"

    To solve the problem we introduce a space between the AT command and the + symbol, so that the remaining command like this:
    AT +EGMR =1,7, "IMEI-A-ASSIGN"
    For example:
    AT +EGMR =1,7, "356189800138035"
    Once done, we send the command and if all goes well, verem0s the following message: "AT COMMAND sent"
    Once the first IMEI changed, select the option Phone 2. At the top a line appears with the command:
    AT+
    In this line we would have to write the command to change the IMEI:
    AT+EGMR=1,10, "IMEI-A-ASSIGN"
    As in previous case in, if we do well, sending the command, the application will give the following error:
    "This AT command is not valid for UserBuild"

    To fix this, do the same as in the previous case: Enter a space between the AT command and the + symbol, so that the remaining command like this:
    AT +EGMR=1,10, "IMEI-A-ASSIGN"
    Once done, we send the command and if all goes well, we will see the following message: "AT COMMAND sent"





  6. 10/15/2014
    Posts: 3

    Why did you delete the marshmallow firmware?





  7. 06/28/2016
    Posts: 1

    where is the gapps

     





  8. 11/17/2016
    Posts: 1

    HI

    Is This Micromax Q417 – Update 04/07/2016 Rom Marshmallow or Lollipop

  9. samsur




    10/28/2015
    Posts: 1

    tested

     


Leave a Reply

You must be logged in to post a comment.

banner