Ulefone
  • Title: Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969
  • Listed: 03/26/2014 3:06 pm
  • ROM Version:Android 4.2.2 MIUI V5 rel 4.3.21
  • You must be logged for ROM download.



Overall Rating : 13

6862 total views, 2 today

1 Total favorites

0 Total downloads

  

Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969
Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 1Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 2Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 3Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 4Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 5Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 6Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 7Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 8Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 9Miui V5_4.3.21 No.1 N3 , CWM version By Mouse1969 - Image 10

Author adMember Info

Mouse1969


DESCRIPTION


Description

ROM port MIUI  ZTE 987 –ROM Android 4.2.2

Features ROM:

AROMA INSTALLER FOR DIFFERENT BOOT ( No.1 N3 v1 series &V2 series )

MIUI V5 _ rel 4.3.21

Gapps include - Rooted

Language support: Multi Lang

Camera 13 Mpx

Proximity sensor calibration include

 

*  Root

*  Extremely stable

*  Gapps already installed

*  Boot Animation &splash screen Original Sam***g

 

Install ROM: ( CWM Version )

There are two different series of No.1 N3: Boot version A and B 
If you can not load the boot with version A, or if your light and proximity sensors have problems, try the other version with Boot B 
thanks 

the official page here : http://www.androidiani.com/forum/modding-altri-terminali-mtk/379758-rom-miui-no-1-n3-ita-multilang.html#post5194802

Step 1: Install CWM recovery , download the custom ROM copied to an external SD card root directory

Step 2: the shutdown state. While holding down:


           –Power button + volume button up, to enter the recovery mode.
           –Wipe Data / Factory Reset ->delete all user data
           –Wipe Cache Partition ->Wipe cache


Step 3: Return to recovery main interface Install zip from sdcard ->choose zip from sdcard ->Select your ROM
Step 4: Brush complete, restart the phone Patience required –first boot takes a while


Donate with PayPal to Mouse1969

Share Button

※Please make a backup of your device before installing or updating ROM


26 Responses to“Miui V5_4.3.21 No.1 N3 , CWM version By ”







  1. 01/21/2013
    Posts: 2

    entrambe le versioni si bloccano all'avvio sulla schermata samsung-miui. Dopo circa un minuto, il sistema si riavvia
     





  2. 09/03/2013
    Posts: 52

    Amazing one, good work my friend. I've also ported Carliv Touch Recovery 6.0.4.4 for my device the HDC Galaxy Note 3 N9006, my device is same of No.1 N3, only with different manufactures names. Mine is a clone, I can use your ROM, just replacing the kernel (zlimage) so i'll will try it out. But one question, you have included the IR Remote on this rom? Thanks, continue with great work.

  3. Mouse1969




    05/21/2013
    Posts: 35

    Alfo: hai fatto fatto i vari wipe? Hai provato sia boot a che boot b da aroma installer?

    Grazie

  4. Mouse1969




    05/21/2013
    Posts: 35

    Fix for force close app PHONE : 

    https://mega.co.nz/#!aQp1TBzK!ATeShS0j0fhNKb2rEGsRsdz71yLpn5GIE7l7EclhAw8

    Copy file zip on sd card

    Flash it with CWM recovery

    Install zip from sdcard ->choose zip from sdcard 

     

    TNX

     





  5. 12/02/2013
    Posts: 7

    No funciona el enlace

     





  6. 01/21/2013
    Posts: 2

    ciao mouse,

    grazie per il riscontro.

    ho provato varie combinazioni su aroma installer (a, b, con e senza wipe, con e senza opzione 1gb)

    tutte le installazioni terminano correttamente, ma all'avvio, il sistema va in loop

    resta fermo sulla schermata di boot e dopo 1-2 minuti si riavvia

     

    ho provato entrambi i boot

    • Mouse1969




      05/21/2013
      Posts: 35

      Purtroppo credo tu abbia un Boot ancora differente da quelli da me previsti , non ne ero a conoscenza.

      Se mi uppi il tuo Boot.IMG te lo modifico ( la modifica serve ad attivare l'init.d)

      Diversamente prova ad inserire il TUO Boot.img nello zip , cancellandone uno dei tre.( neturalmente rinominandolo esattamente come quello che cancelli in modo da poterlo richiamare da aroma )





    • 02/01/2014
      Posts: 4

      I had the same problem. Install this boot (I found it on www.androidiani.com/)

      Download file





  7. 10/20/2013
    Posts: 2

    Hello mouse1969.
    I have tested this rom on my s4 Hdc Leyend by changing the boot.img from my terminal and starts perfectly.
    I've tried some other miui rom and I think that has always been based on my port.
    I wonder if you have experienced a problem that I've seen this version of your rom.
    The option of "Data"link on the tabs when you give the finger from the top of the screen does not work. Not only illuminates and makes ocpiones skip down a few seconds if the finger moves.
    In previous versions this option works perfectly and this version does not.
    Let me know if you have solution (some library to change) or if it is a general error because this rom is not exactly designed for my hdc or no1.

    Thanks for sharing your rom's.

     

    Ciao mouse1969.
    Ho testato questa rom sul mio s4 Hdc Leyend cambiando il boot.img dal mio terminale e si avvia perfettamente.
    Ho provato qualche altro MIUI rom e penso che si èsempre basato sulla mia porta.
    Mi chiedo se ha avuto un problema che ho visto questa versione del rom.
    L'opzione di collegamento "dati" sulle schede quando si dà il dito dalla parte superiore dello schermo non funziona. Non solo illumina e rende ocpiones saltare giùun paio di secondi se il dito si sposta.
    Nelle versioni precedenti questa opzione funziona perfettamente e questa versione non lo fa.
    Fatemi sapere se avete una soluzione (una libreria per cambiare) o se si tratta di un errore generale, perchéquesta rom non è esattamente progettato per la mia hdc o no1.

    Grazie per aver condiviso la tua rom di.

     
    —————————————————
     
     




  8. 03/19/2014
    Posts: 3

    i have installed all these firmwares on my no.1 n3 and all are successful but when i reboot it just goes to boot sccreen and re boots again and again can anyone help please really wanted custom rom…..installing using cwn v 5.5.0.4 and i wipe data , cache and dalvik





  9. 02/01/2014
    Posts: 4

    Where in this rom is option to calibrate proximity sensor? I cannot find it.





  10. 09/03/2013
    Posts: 52

    Theres normal in this ROM have a pinkish tint on Camera Lens?


Leave a Reply

You must be logged in to post a comment.

banner