• Title: MIUI V7 Xiaomi.eu Multilang
  • Listed: 02/02/2016 10:24 am
  • ROM Version: 4.4.2
  • You must be logged for ROM download.

Overall Rating : 6

1890 total views, 2 today

1 Total favorites


MIUI V7 Xiaomi.eu  Multilang

Author adMember Info



ROW base

Firmware from Xiaomi team.eu is a quality build with an impressive number localization

Donate with PayPal to dinasnet

Share Button

※Please make a backup of your device before installing or updating ROM

9 Responses to“MIUI V7 Xiaomi.eu Multilang”

  1. 06/09/2014
    Posts: 6

    CN or ROW?

  2. 05/17/2015
    Posts: 1


  3. 10/23/2014
    Posts: 10

    Installation instruction on CN version, please. 

    Polish language is present ?

  4. bentcreamer

    Posts: 10

    this room is recomended. smoth no lag. bu have one bug. OTG doestn support anymore.

  5. 10/23/2014
    Posts: 10

    Great ROM :-)   Very smooth and no lags. A lot of translations. I use the Polish language and interface is 100 % translated. It can be installed on a 1GB version of the CN but you must first properly install by Flash Toll this stock ROW ROM: http://www.needrom.com/download/rom-stock-4-4/  and ROW TWRP. After, you can install this ROM. Urgent! Before install backup yours IMEI numbers !

  6. 07/19/2014
    Posts: 1

    Can someone provide a guide on how to flash with this rom ?

    • 10/23/2014
      Posts: 10

      Flashing instruction (ROW 2GB/CN 1GB):

      You do it on your own risk !

      1. You must have installed any Android ROM version 4.4.2 (CN or ROW) with TWRP recovery in your phone.
      2. Backup your current ROM (with NVRAM) using this TWRP and copy all backup files into your computer.
      3. Install USB driver ( http://www.needrom.com/wp-content/uploads/2014/08/USB-VCOM-Driver4.zip )  and Flash Tool v5.1548 (or newer) ( http://spflashtool.com ) into your computer.
      4.Put ROM file into Flash Tool (in Options->Download menu check this options: USB Checksum, Storage Checksum) and  click Download button. 
      5.Connect turned off phone by USB cable to your computer. Download start automatically. Do not disconnect phone before end. Urgent! If you have phone in CN version and if you have an error when you trying run Download you must before them run Format (Auto Format Flash), all data will by lost!. After run Download.
      6.Install by FlashTool the ROW TWRP Recovery v2.8.4.0 in your phone ( http://dfiles.ru/files/6dyr6npn4 ). Do not disconnect phone before end.

      7.If all operations ended, disconnect your phone and turn on it (first boot may takes several minutes). If ROM start properly check your IMEI numbers. If you lost them, look points 8-16, if not this is the end of ROM istallation procedure and look point 17.
      8.If you lost IMEI numbers, run phone into TWRP recovery mode (by Power+Vol Up +Vol Down).
      9.Run backup (only NVRAM).
      9.Restart phone and run normally into ROM.
      10.Connect phone to your computer by USB cable.
      11.Copy files nvram.emmc.win and nvram.emmc.win.md5 form your computer (backup created in point 2) into TWRP backup catalog in your phone (replace exist files).
      12. Disconnect phone.
      13. Run phone into TWRP recovery mode.
      14. Run Recovery option and check only NVRAM.
      15. Restart phone and run normally into ROM.
      16. Check IMEI numbers. If all exist, procedure of installation is ended.
      17. Have fun with new ROM :-)



      If you have problem with signal strength, install by TWRP  this file: CN v102 modem ( http://depositfiles.com/files/6p65pybwb ).

  7. 04/23/2014
    Posts: 1

    How to load miui v7 file into Flash Tool if there is no MT6582_Android_scatter file. And that is why I can not put rom file into Flash Tool


    Please help

Leave a Reply

You must be logged in to post a comment.