• Title: MLAIS M7+
  • Listed: 10/11/2015 12:51 am
  • ROM Version:ROM Android 5.1
  • You must be logged for ROM download.

Overall Rating : 0

2643 total views, 1 today

1 Total favorites



Author adMember Info


  • Listed by: SoCr@Te
  • Member Since: 05/15/0470


ROM Mobile MLAIS M7+ –ROM Android 5.1


Official ROM MLAIS M7+ version: MLAIS_M7_PLUS_20150916 –c228v53_jbl_c228_mlais-user 5.1 LMY47D

Gapps include –No Rooted

Language support: Multilang


ROM Install :

- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading"and search MT6753_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only"or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).

- Press “Download”button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

Share Button

※Please make a backup of your device before installing or updating ROM

3 Responses to“MLAIS M7+”

  1. 10/22/2013
    Posts: 2

    By the way, the ROM is the SAME in the MLAIS Web Sites

    The ONLY ROM was on the 16.09.2015

    I'm reading in the MLAIS Forum that with M7+ some issue are presents, first and most important the Battery Life

    So, i'm hope that MLAIS will be released as soon as possible an OTA or a new Firmware that solve the problem because the phone is very big hard

    So, i also know that the PLUNK release the same phone called HERO and HERO+ for the M7 and M7+

    Do you think the rom are interchangeble ? Best shoot if should …

  2. 12/29/2015
    Posts: 1

    Hi guys.

    I have a problem when I try to flash my device using flash tools, its a Mlais m7 plus, when I try it in flash tools with a version diferent than 3.13XX sends a message:

    SP FLASH ERROR: (8417)

    The load scatter file is invalid!

    When I open it in a version 3.13XX it doesnt shows that message but when I connect my device it sends a message saying:


    [BROM] Can not pass bootrom start command! Possibly target power up too early.

    My Pc is a Window 8.1 machine and I have istalled the drives correctly.

    ¿Does any one of you can help me? 

    Thanks for your time.


    • 02/06/2016
      Posts: 1

      download and use to flash last version of spflashtool v5.1628 it will surely work.Good luck!

Leave a Reply

You must be logged in to post a comment.