• Title: MX4 RK3229 TV BOX Android 5.1
  • Listed: 09/06/2016 1:57 pm
  • ROM Version:Android 5.1
  • You must be logged for ROM download.

Overall Rating : 0

642 total views, 4 today

4 Total favorites


MX4 RK3229 TV BOX Android 5.1

Author adMember Info



 Password is S.W.A.T

Make sure your you have USB male to male cable + all the tools attached.


Install the DriverAssistant first.

Unzip the file and start the RKBatchTool program, and use the firmware path selector to find your firmware image.


Now put your MX4 into recovery mode or flash mode using ROM Dumper Tool by pressing switch .As you will see you will see that your device is connected, indicated by the green box. If you are upgrading from say a manufacturers Rom to a new version hit the restore button.

Step 3
Once you have done this the software will send the firmware to your MX4 and the flashing process will begin, you will see firmware loading on the RockchipBatchTool screen, just leave it to do its work and be patient and be careful not to knock or touch anything while it is flashing. Once the process has completed your MX4 will disconnect from the program and the green box will not be highlighted. Now the tablet will begin to flash and reboot with your new firmware on it!


Donate with PayPal to S.W.A.T

Share Button

※Please make a backup of your device before installing or updating ROM

5 Responses to“MX4 RK3229 TV BOX Android 5.1”

  1. S.W.A.T

    Posts: 12

    Additional links:

    1- MX4 RK3229 ANDROID 5.1 BY S.W.A.T

    2- DriverAssitant_v4.4

    3- ROM_Dumper_Tool

    4- RockChip_Batch_Tool_v1.8

  2. 04/12/2014
    Posts: 2

    Thank you!

  3. 09/25/2014
    Posts: 2

    i need to factory reset my tvbox
    help me please
    i cant access setting backup/ factory /reset

  4. 03/27/2013
    Posts: 8



    I messed up with the Build.prop, and device won't even turn on, it's stuck on boot logo, do you  know how to solve this?

  5. 02/21/2017
    Posts: 1

    Thanks S.W.A.T i was actually battling to unbrick my device. But you're was easy to use. A little confusing at the end regarding the "switch"part. I used switch in the ROM Dumper tool and it gave me error but copied the original native image of the MX4 device using the Rockchip Batch Tool. Has anyone tried 5.1 this device yet. I've just got mine working so I don't want to play around yet. Thanks again

Leave a Reply

You must be logged in to post a comment.