- Title: Official ROM Faea F1
- Listed: 12/07/2013 11:20 pm
- ROM Version: Android 4.1.2
You must be logged for ROM download.
6084 total views, 1 today
1 Total favorites
597 Total downloads
1.optimize the standby current(save battery life)
2.optimize the sesitive of touch screen,you can even touch the screen through fingernail now.
3.fixed – ringtone volume too low problem when earphone inserted.
4.fixed – clear button is too small problem on dail pad.
5.fixed – it takes too long to charging from 99% to 100%.
6.optimize the quality of picture taking by camera
7.optimize the speed of running apps.
8.fixed – some software compatibility.
9.fixed – the breath light problem on rom 0702.
10. fixed – phone did not go to home screen after reboot.
11. fixed - exit when playing TempleRun 2
12. optimize the speed of running apps.
13. reduce the power consumption and reduce the heat problem.
USB Cable Download:
Please use this download software at your own risk.
Operate carefully, Make sure the battery is fully charged,
If download failed, your mobile may become brick. And have to be returned to factory for repair.
Install the USB driver
1.Insert a fully charged battery, power on, open the dial pad,and dail #*20110606# ->Test Switch->On, reboot may needed at first time to turn on.
2.connect your mobile to your pc(windows only)
3.UnRAR the FaeaF1_Driver.rar to your PC drive.
4.install all the drivers as follows
Open Faea F1 Flash Tools-QDL
Make sure there displays the “The Device is ready, please
If there displays “Device is not ready！” your drivers may be not properly installed, check the Device Manager Of your PC(windows), make sure all the device drivers are properly installed.
3、 UnRAR the software ROM_Flash_Faea_F1_xxx.rar to your PC Drive, open QDL，"AP file path",choose the ROM Directory，"CP file path" ，choose the ROM Directory。
Attention：Make sure All AP files and All CP files are Checked!!
Click “DownAll”,and don’t operate during the downloading.
When it Says“Download finished, please reset the device!”，
Means download is complete, you can now safely unplug the cable ,quit the download software,
and take out the battery, then re install the battery and power on.
Install ROM via Recovery mode:
Step 1: Download the custom ROM SD Faea F1 copied to an external SD card root directory
Step 2: the shutdown state. While holding down:
– Power button + volume button up, to enter the recovery mode.
– Wipe Data / Factory Reset -> delete all user data
– Wipe Cache Partition -> Wipe cache
Step 3: Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
Step 4: Brush complete, restart the phone Patience required – first boot takes a while
※Please make a backup of your device before installing or updating ROM