Ulefone
  • Title: OUKITEL K10000
  • Listed: 06/23/2016 1:07 pm
  • ROM Version:TWRP 3.0.2 for Android 6.0
  • You must be logged for ROM download.



Overall Rating : 2

1809 total views, 8 today

1 Total favorites

461 Total downloads

  

OUKITEL K10000

Author adMember Info

poptv


DESCRIPTION


TWRP 3.0.2 for OUKITEL K10000 MT6735M Tested with v.8.0, v.12 and FZ_v.1.0 Rom

MULTILANGUAGE

GUIDE:

Download and Install correctly Mediatek Preloader drivers

( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install:)

https://www.youtube.com/watch?v=50pD0mONm44

http://laurentiumihet.ro/technology/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/

https://thebroodle.com/microsoft/windows/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/

UNPACK RAR in A FOLDER

1- With flashtool load MT6735M_Android_scatter.txt

2- Select download and connect smartphone to pc (smartphone must be powered off)… in few seconds will start the process and the new TWRP will be flashed.


Share Button

※Please make a backup of your device before installing or updating ROM


12 Responses to“OUKITEL K10000”







  1. 04/23/2016
    Posts: 4

    Perfect for Android 6.0 –v8.0 ROM! Thanks you!





  2. 07/06/2016
    Posts: 3

    Still can not root the ROM V8! event following this site procedure to install the MTK driver. How can I do. my PC is Wind 10 &64

     





    • 03/31/2016
      Posts: 1

      You need to install twrp,then you can flash SuperSU zip from here:forum.xda-developers.com/showthread.php?t=1538053





  3. 06/07/2015
    Posts: 2

    does not work with the Rom v12





  4. 09/21/2016
    Posts: 5

    Does it also work with the first 64bit firmware FZ_V1.0_20160818?

    • poptv




      04/17/2016
      Posts: 5

      Yes it does. The firmware FZ_V1.0_20160818 is 32-bit.





    • 09/21/2016
      Posts: 5

      Ok thx. I just read somewhere that the firmware is 64bit so I had to believe it. I think it was on 4pda.ru forum in the stock ROM downloads for K10000.





  5. 09/21/2016
    Posts: 5

    Does not work. Flash is ok, menu for selecting recovery/fastboot/normal mode is ok. But after choosing recovery it boots normally into android. Tried it several times. Do I make something wrong? Is there something to enable/disable in settings except allow unknown sources?

    • poptv




      04/17/2016
      Posts: 5

      After flashing TWRP recovery you should first boot into recovery, because if you select a normal mode, the system returns the stock recovery (sorry for my English, I hope could explain clearly).





    • 09/21/2016
      Posts: 5

      I know, but this point does not work. I select Recovery, phone reboots and starts into Android.





  6. 09/21/2016
    Posts: 5

    There is a difference between phones with FZ_v1.0 preinstalled and all others. With preinstalled version TWRP and alternative ROMs are not usable. Heard this from two other sources by now.


Leave a Reply

You must be logged in to post a comment.

banner