- Title: ROM Mate 7 TL10 Premium for 3G RAM model only ! based on official B120SP03, rooted and optimized
- Listed: 10/23/2014 3:12 pm
- ROM Version: B120SP03
You must be logged for ROM download.
13653 total views, 1 today
1 Total favorites
817 Total downloads
This is for Mate 7 Premium (Gold ) with 3 Gb of RAM. For model TL10. Dont try it on 2 Gb RAM model !
Based on the end of the package to unpack production B120SP03
Since writing Brush Script
Add Root permissions and use SuperSU 2.02 as an authorized management software ,
USB debugging is enabled by default
Adding support init.d of
The official added only streamline the promotion of software, pure mild streamline
Adding ING markets Brush after facilitate common software download
Some small optimization
Stay tuned for more features
Please read the "Introduction" and "Notes"
Source Download link:
You will need to have bootloader unlocked to do so follow these steps:
Tutorial to unlock bootloader on Huawei Mate 7
We must know our serial number and IMEI / MEID. To do this we use the panel to make calls and enter: * # * # 2846579 # * # *
Enter into a Menu where our serial number appears. We noted.
Now to find our IMEI you type * # 06 # and we appear. If we use two SIMs we scored the first sim to come out. Write it down too.
Also need to find our Product ID.
To do this enter: * # * # 1357946 # * # *
We'll get a 8 digit code, write it down too.
We introduce this data on page Huawei unlock bootloader:
You can use this method to unlock bootloader of any Huawei phone. To get code to unlock bootloader of Unicom 2 Gb RAM version choose MT7-UL00 . To get code for Unicom Premium 3 Gb RAM choose MT7-TL10.
As a result we unlock code generated for nuestor Mate 7 appears.
Now comes the most important part is to unlock our bootloader using the code that was given to us.
Steps to unlock bootloader:
1-. Install the necessary drivers to acknowledge either the Mate PC 7 is recommended to install Huawei HiSuite as it tends to automatically install the drivers. Another application could be recommended Snappea.com. ADB also install TOOL
2. Enable developer mode in Mate 7. We go to Settings, About Phone and give 5 times in ROM version number. Now we the Developer option (developer) will appear and activate the USB debugging mode option.
3. Now we execute a Windows CMD (command window) window and enter "adb devices" and enter. It would appear that a message saying that the connection is correct.
4. We now introduce the following:
The phone will reboot and enter into FastFoot mode (totally blank screen)
5-. We now introduce:
and a message should appear saying that the connection is correct
6-. We now introduce:
oem unlock (unlock the bootloader code) (this number is the 16 digit unlock code that Huawei has generated page)
Thus exemplary remain with this:
oem unlock 1234567812345678
Enter and give the phone will reboot and go back into fastboot (blank screen) mode and see a message that gets made successfully unlocked.
We now introduce:
The phone will restart normally and you will have unlocked bootloader and flash CWM and Recovery is possible without problem.
How to re-lock the bootloader (if you need to pull warranty)
The process is basically the same except that the command to enter fastboot mode is:
oem relock 1234567812345678
Then once that is done we will show that the state becomes locked bootloader.
※Please make a backup of your device before installing or updating ROM