Ulefone
  • Title: STAR N9500 – Rom stock from downgrade 20130514
  • Listed: 06/25/2013 2:11 am
  • ROM Version: ROM Android 4.2.2
  • You must be logged for ROM download.



Overall Rating : 11

16017 total views, 1 today

4 Total favorites


  

STAR N9500 – Rom stock from downgrade 20130514

Author adMember Info

spemm


DESCRIPTION


Hardware : MT6589
Model : Star N9500
Build number : freedgt_20130620
Build date UTC : 20130507-112453
Android  v : 4.2.2
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P4, 2013/05/04 18:26
Kernel v : 3.4.5 (root@android) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP  Fri May 10 11:08:37 CST 2013

 

USE NORMAL SCATTER FOR LCD DRIVER LT050ANKP019A

USE SCATTER2 FOR LCD DRIVER 1-RX_499NT_598A

 

Recovery 3e for 1-RX_499NT_598A in folder Star N9500 STOCK 4.2.2 use scatter2

change Recovery for LT050ANKP019A RECOVERY IN TO FOLDER Scatter From LCD CWM REPLACE IN FOLDER Star N9500 STOCK 4.2.2 use normal scatter for flash

 

 

System based x920  hope solve problem partial brick last downgrade   20130514>>>>>>>20130510 version

 

for root

[ROOT] Tool For Most MTK6589 Devices Including Star N9500

Hello everyone,
I would like to share with you a root tool that worked with me for Star N9500 MTK6589 and should work on most similar devices too.
Although this tool is made for Motorola it worked for me!
==============================================
INSTRUCTIONS:

1.Download this file motochopper to your PC.
2.Extract the entire contents of the zip file.
3.If you are using Windows, ensure you have installed the latest Motorola USB drivers available for your phone.
4.Ensure USB Debugging mode is enabled on your device.
5.If you are using Windows, navigate to the extracted directory and execute “run.bat”. If you are using Linux or OS X, navigate to the extracted directory in a terminal and execute “./run.sh”.

 

 

many thank's  @freedgt  relaser friend


Donate with PayPal to spemm

Share Button

※Please make a backup of your device before installing or updating ROM


14 Responses to“STAR N9500 – Rom stock from downgr”







  1. 06/11/2013
    Posts: 5

    I am still with my stock ROM. How can i know which LCD driver i currently have?

  2. spemm




    03/07/2013
    Posts: 342

    you  have root device

    open mtkdroid software plug device, click root button for temporary shell
    see drive

  3. spemm




    03/07/2013
    Posts: 342

    for root http://www.needrom.com/wp-content/uploads/2013/06/motochopper-BY-djrbliss-on-droidrzr.com.zip

  4. DJ_Zero




    05/26/2013
    Posts: 7

    Hi! My phone is Star N9500. And when I want update it to 4.2.2, it bricked.
    Erorr is:
    BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)

    Please help me!





    • 05/06/2013
      Posts: 81

      The procedure to re-animate your phone is described as follows (copied from other threads here):

       palicaj on 04/27/2013 @ 12:03 pm

      I had 4.2.1,  i think date was : 20130322_e2006_v89_jbaol1
      Now is dead.

      I used SP flash tool v3.1304, (v1252 didnt worked) on win7 x64, run as administrator.
      i select scater loading file, everything looks ok, i click upgrade.
      Everything was ok, at end ar restart, i had blank screen, phone buttons was on, but phone didnt worker. Afret that i tried same way to download older firmware from this site and… process stopped in the middle. with error.

      Flash tool find the phone as MTK USB port, but then after try to upgrade first thing i get error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) – [EMI] Enable DRAM Failed!

      Phone do not react holding together  volume up + power or volume down + power
      With battery computer recognize it as MTK USB Port (on usb2 or usb33 …)

       palicaj on 04/28/2013 @ 9:00 pm

      VERY NICE INFO!!
      I rescue my phone.
      - i downloaded from this site firmware for Star S5 with the name Root_DelChina_MP_mt89_v9_c05_pulid_jb2_20130321-160914_PC

      - i used SPflash tool v3.1304.0.119
      - Phone with no battery , disconected.
      - start flash tool, select scatter file srom s5 rom directory
      - i clicked "dowload"
      - I connected the phone
      - flash tool did something, and in ca 3-5 second i got warnint that is better to clikc  "Firmware update" so i cliked this firmware update
      - disconect phone from USB , and connect it agani
      - flash tool started to flash the phone !!!! (no error DRAM_FAIL!!!)
      - everything went ok, flash completed.

      I tried to run the phone, but screen just turned on back light and of and on …
      So… i tried new flash with correct rom for N9500 – downloaded here with date 2013-04-19, and process started!!! no error, finished. Disconnect the phone, put the battery on, i put the phone to the charger (i was not sure how is battery) and luckily i have working phone.

      Thanx to SoCr@Te for ROM – this one works !!

       anthony on 06/23/2013 @ 10:32 am

      Hi if you are getting Brom error with flashtool

      1)make sure rom is in same file as flashtool

      2)use another version of flashtool one with different build number.

      I have had the most success and no problems with this build.

      http://www.mediafire.com/download/7o8gf838uu9iqp5/SP_Flash_Tool_v3.1304.0.119.rar

  5. spemm




    03/07/2013
    Posts: 342

    use SP_Flash_Tool_v3.1304.0.119

    and your scatter

  6. spemm




    03/07/2013
    Posts: 342

    have  your  backup   flash use SP Flash Tool v3.1316.0.150

     





  7. 05/29/2013
    Posts: 15

    I have a problem with the preloader, I connect usb cable computer for 2 seconds indicates that the connected preloader and immediately disappears, and when the batteries have set no reaction no, please help me

  8. spemm




    03/07/2013
    Posts: 342

    use   http://www.needrom.com/mobile/star-n9500-rom-stock-20130514/





  9. 05/26/2013
    Posts: 6

    my hand phone star n9500…. front camera not working… why? wht should i do? Please help me…

     





  10. 05/26/2013
    Posts: 6

    Hello friends.
    I have a problem. The rear camera of my N9500 ​​disappeared. I've tried installing the firmware of the camera with Sp_mdt and I get nothing. I've tried installing new Rom and I have not gotten anything. Now go into Factory Reset-Test Report-Main camera-Preview/capture/strobe and I get the following error.
    acdkIFInit Fail.
    Anyone know what this is? Can you help?
    Thanks for the help really


Leave a Reply

You must be logged in to post a comment.

banner