- Title: STAR S7189
- Listed: 07/27/2013 5:40 pm
- ROM Version: ROM Android 4.2.1
You must be logged for ROM download.
35202 total views, 1 today
6 Total favorites
ROM STAR S7189 – ROM Android 4.2.1
Update Official Version: 20130628_e2001v21_v89_jbl1a668_fwvga ( THX to sas007 For this ROM )
Changelog: ( After 20130320 )
Solve probabilistic press the volume down key feature is the volume up key issues
Update to the latest platform
Version to V2.1
With the latest screen driver
Internal memory to 2G
No machine test
Modify 89M does not boot, IMEM problem could not be written successfully
Optimization 0329 normal mode transient reddening problems
Calibration parameters to restore the factory settings to solve the problem of missing
Audio parameter modification: normal mic-180, SPH-122; headphones -190
Let Ann Bunny test screen display resolution of QHD: 540 * 960
Model and version number removed fwvga field
Modify the direction of the gravity sensor problem
Compatible with the new gravity sensor
. Solve the problems from the past distance sensor
Now the distance sensor calibration requires two steps, the first step no obstacles, obstructions placed second step
EMMC factory pattern to solve the problems can not be seen
ROM Official Star version: 20130320_e2001_v89_jbl1a668_fwvga_02
Recovery in English , not rooted
1 Caller ID is truncated solve interface
2 Solve the problem of conflict of wifi address
3 Optimization AC power
Language support: Multilang
Install ROM :
To unpack TOOL run Flash_tool.exe
Select a the in _scatter_emmc.txt in Recovery with Flashtools
Click Flash_tool.exe interface Firmware-> Upgrade
Phone after taking the battery in put something
Connect the data cable
Brush finished with green circles appears
Install with SP MDT:
Unpack the archive N9589-SPM.zip and archive with the ROM
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose Database Factory menu> Configuration File data source and specify the file MTK_DATABASE.mdb (it is in the folder SP_MDT).
7). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
8). Click File and select the MT6589_Android_scatter_emmc.txt file (it's in the folder with the rom).
9). The other parameters are fixed, as in the screenshot below.
10). Click "Start all".
11). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer, remove and insert the battery and reconnect it to the computer.
12). After (OK) click Stop and disable any phone.
Recovery CWM of dummer (Thx)
" I have made a working CWM recovery.Fully Tested working fine with stock firmware 20130320
if you flash only cwm you may lose sim(no service)as i did but then i flashed stock firmware with cwm replacing stock recovery and all good using sp flashtool
I then installed S7189 custom rom from SD card via CWM recovery and all good. "
※Please make a backup of your device before installing or updating ROM