• Title: THL W200S Resurrection Remix v5.6.8 powered by mtkroms.com
  • Listed: 05/16/2016 2:20 am
  • ROM Version:6.0.1
  • You must be logged for ROM download.

Overall Rating : 5

1954 total views, 6 today

3 Total favorites

434 Total downloads


THL W200S Resurrection Remix v5.6.8 powered by mtkroms.com
THL W200S Resurrection Remix v5.6.8 powered by mtkroms.com - Image 1

Author adMember Info


After a lot of work, i’m proud to give you marshmallow for the w200s! Please follow the installation instructions:

1. Install this rom with spflashtools: http://www.needrom.com/download/w200s_kk_by-t3/ . If this rom does not work on your device, then my rom wont work either. The kernel is based on that rom, to have everything working(including front camera!)

2. Flash CWM (you can use spflashtools, just change the path for the recovery).

3. Copy Reformat.zip to an external sd card, boot in cwm and flash it. This will repartition your storage to be a big 27 gb data partition. CWM will reboot, and run the created format.zip from sdcard, and then format both data and sdcard partitions from CWM.

4. Reboot into system and verify the partition layout is correct. If it is not, repeat the last step.

5. Flash TWRP3 ( you can use flashtools for this as well).

6. Copy RR_W200S and the gapps to an external sdcard, reboot in twrp, wipe everything(system,cache,data), format data, then go to mounts and untick everything except the micro sdcard.

7. Flash RR_W200S,do not reboot(important!), and flash open gapps.

8. Reboot and enjoy.

I may provide updates for this rom, but i will need your feedback,as i do not own the device. If your phone does not work with the original kitkat port, it will not work with my rom. If you want to have updated firmware on your phone too badly, buy a replacement screen, that’s what happened to my friend( he broke his old incompatible screen and the new screen worked fine with the kitkat kernel, so he is the reason i created this rom).


GPS(A-GPS working).


Me: I ported this rom and fixed a lot of bugs, i also created TWRP 3.0 for the W200S.

ThL Thailand Club: Ported kitkat to the W200S with everything working.

Fire855 –A legend, built stable CM13 for MT6592
Ferhung –The man behind CM13 for MT6582
Diparth Shah
Ajit Guraya –Compiled Resurrection Remix v5.6.8 for mt6592 from source and fixed camera !
John Reniel, Himura Rudyanto, Christopher Mark –Porting This ROM To MT6592 and fixing bugs
Minh Quoc and Karim Gahgah –For video recording fix
Aniruddha Adhikary –For his amazing USSD Fix
Team Roger That –Ajit Guraya, Diparth Shah, Pawan Diyal, Ashutosh Dubey, Waseem Maya, Ankit Bhatangar, Rohan Taneja, Vipul Jha, Pranav Reddy 
Resurrection Remix Devs/Team –www.resurrectionremix.com
Required blobs (Really huge thanks) :
nofearnohappy, Varun Chitre, Ariafan, Vald.masti, Fire855, Alex

The original rom is found here : http://www.mtkroms.com/2016/05/stable-ota-resurrection-remix-mm-mt6592.html

If you liked this rom, you can buy me, or more importantly the guys working on mtk(like fire855) a beer.

P.S. Because the w200s has a small system partition, you can only flash open gapps pico from here: http://opengapps.org/. Pick ARM,6.0,pico,

Donate with PayPal to pchatzop

Share Button

※Please make a backup of your device before installing or updating ROM

25 Responses to“THL W200S Resurrection Remix v5.6.8 powe”

  1. 03/15/2013
    Posts: 14


  2. 06/12/2015
    Posts: 4

    Hello. Great rom. Everything works fine. Only after waking from sleep does not touch layer. It is not possible to replace any file in rom? I am sorry for my english. It is translator

  3. 05/19/2014
    Posts: 38

    Thanks for the feedback, but your problem cannot be fixed. Your screen is not fully compatible with the kernel, you would have this problem in stock kitkat rom i posted as well. You could buy a new screen and sell your old one.

  4. 06/12/2015
    Posts: 4

    Thank you for answer. I had this mobile KitKat another rom, touch and operate. What would have happened if you'd like your rom replace the kernel of the work. It's just an idea. I'm an amateur. Thank you for your time…..

  5. 05/19/2014
    Posts: 38

    That kitkat had front camera working? If you can send me the boot.img of that rom, i can make a kernel for you to flash.

  6. 06/12/2015
    Posts: 4

    Hello. I've tried several KitKat rom. Be not front camera or touch. Both functions at the same time do not go to any. Unfortunately. I'll stick with android 3.4 Thank you for your efforts and excellent work. Maybe someone manages to both functions simultaneously deploy

  7. 06/12/2015
    Posts: 4

    I wanted to write android 4.3

  8. 05/19/2014
    Posts: 38

    Sorry to hear that, you are right, if i made a kernel for you, you would have touch but lose front camera. Only solution is to have get a compatible screen.

  9. 06/13/2014
    Posts: 33

    you can use spflashtools, just change the path for the recovery????


  10. 05/19/2014
    Posts: 38

    Yes, thats correct. Change mode to download only, untick everything but recovery, and click on the path of recovery to set the path for a custom one. I you are about to install this rom, wait some hours, i have uploaded a new one with every bug fixed. It should be able to see it soon. Just get to the part with TWRP 3.0 and wait for the new rom.

Leave a Reply

You must be logged in to post a comment.