Ulefone
  • Title: TrekStor SurfTab ventos 7 HD
  • Listed: 05/25/2016 5:31 pm
  • ROM Version: MP FW Ventos 7HD
  • You must be logged for ROM download.



Overall Rating : 0

354 total views, 1 today


  


Author adMember Info


DESCRIPTION


this is the stock rom for TrekStor SurfTab ventos 7 HD . you'll find the rom & tool to flash plus instruction 


Donate with PayPal to DrWeed

Share Button

※Please make a backup of your device before installing or updating ROM


2 Responses to“TrekStor SurfTab ventos 7 HD”







  1. 10/08/2016
    Posts: 2

    Hi,thanks for the ROM.

    Unfortunately, it bricked my device.

    Installed the tool under Win10 64 and flashed the ROM. After the flash failed, the tablet did not power on.

    Can you help?

    Here's the log:

    current pc version is: win7
    current tool version is: v1.6.2.0128
    —–importConfigFiles—–filenameC:\Users\Robert\Downloads\MP_FW_Ventos_7HD (1)\ST70208-20130808\config_progress.xml
    [T 0][14:15:46]: load spl …
    [T 0][14:15:47]: Transfer Complete! total size is 19028 Bytes
    [T 0][14:16:07]: load spl …
    [T 0][14:16:08]: load uboot …
    [T 0][14:16:08]: Transfer Complete! total size is 572144 Bytes
    [T 0][14:16:14]: test command exec: crc 0x8f800000 572144 1c0ab126
    [T 0][14:16:14]: command exec: crc 0x8f800000 572144 1c0ab126
    [T 0][14:16:14]: sendCommandWithReply: crc 0x8f800000 572144 1c0ab126 maxCount:30
    [T 0][14:16:16]: begin run 8f800000
    [T 0][14:16:19]: finish run 8f800000
    [T 0][14:16:21]: command exec:set_chgcur 0
    [T 0][14:16:22]: command exec:video dev bl_off
    [T 0][14:16:23]: command exec:video dev disable
    [T 0][14:16:25]: command exec:sf probe 2
    [T 0][14:16:26]: command exec:sf erase 0 100000
    [T 0][14:16:41]: command exec:nand rom_protect off
    [T 0][14:16:42]: command exec:nand scrub 0
    [T 0][14:16:48]: command exec:defenv
    [T 0][14:16:49]: command exec:setenv bootargs ${bootargs} a9_clk_max=600000000
    [T 0][14:16:50]: load command: setenv recovery_command –usb_burning
    [T 0][14:16:51]: command exec:cmd_in_mem 0×82000000
    [T 0][14:16:53]: command exec:save
    [T 0][14:16:54]: command exec:nand info
    [T 0][14:16:56]: load uimage …
    [T 0][14:16:56]: Transfer Complete! total size is 4253696 Bytes
    [T 0][14:17:02]: command exec:bootm 0×82000000
    [T 0][14:17:04]: boot uImage …
    [T 0][14:18:20]: load spl …
    [T 0][14:18:26]: Transfer Complete! total size is 19028 Bytes
    [T 0][14:18:35]: load uboot …
    [T 0][14:18:36]: load uboot …
    [T 0][14:18:38]: load uboot …
    [T 0][14:18:48]: load spl …
    [T 0][14:18:49]: load uboot …
    [T 0][14:18:49]: Transfer Complete! total size is 572144 Bytes
    [T 0][14:18:55]: test command exec: crc 0x8f800000 572144 1c0ab126
    [T 0][14:18:55]: command exec: crc 0x8f800000 572144 1c0ab126
    [T 0][14:18:55]: sendCommandWithReply: crc 0x8f800000 572144 1c0ab126 maxCount:30
    [T 0][14:18:57]: begin run 8f800000
    [T 0][14:19:00]: finish run 8f800000
    [T 0][14:19:02]: command exec:set_chgcur 0
    [T 0][14:19:03]: command exec:video dev bl_off
    [T 0][14:19:04]: command exec:video dev disable
    [T 0][14:19:06]: command exec:sf probe 2
    [T 0][14:19:07]: command exec:sf erase 0 100000
    [T 0][14:19:22]: command exec:nand rom_protect off
    [T 0][14:19:24]: command exec:nand scrub 0
    [T 0][14:19:29]: command exec:defenv
    [T 0][14:19:30]: command exec:setenv bootargs ${bootargs} a9_clk_max=600000000
    [T 0][14:19:31]: load command: setenv recovery_command –usb_burning
    [T 0][14:19:33]: command exec:cmd_in_mem 0×82000000
    [T 0][14:19:34]: command exec:save
    [T 0][14:19:35]: command exec:nand info
    [T 0][14:19:37]: load uimage …
    [T 0][14:19:37]: Transfer Complete! total size is 4253696 Bytes
    [T 0][14:19:43]: command exec:bootm 0×82000000
    [T 0][14:19:45]: boot uImage …
    [T 0][14:20:53]: cannot find disk! 60times
    [T 0][14:20:54]: failed because no connected device ,current step is 19


Leave a Reply

You must be logged in to post a comment.

banner