• Title: TWRP
  • Listed: 03/24/2016 3:07 pm
  • ROM Version:TWRP - Android 5.1
  • You must be logged for ROM download.

Overall Rating : 4

480 total views, 2 today

2 Total favorites

79 Total downloads



Author adMember Info


Please make a backup of your stock recovery by doing a readback with Flashtool first. You must specify the beginning address and length as found in the scatter file. If you do not know how to do this, I do not recommend you to proceed with this modification as you may brick your phone by mistake. Maybe you should use Goggle to help you understanding what's involved before proceeding.

This Recovery is derived from the TWRP 3.0.0 for the Doogee Y100 Pro found on Needrom. I modified it to match the Be Pro 2 specifications. I tested it it throughly and did not find any error however, if you find anything wrong please report it immediately.


1- You must have the Preloader driver installed otherwise, Flashtool will not connect to the phone. Google is your friend.

2- Make sure you do not have any other files than the scatter.txt and the recovery.img files in your folder. They might get loaded to the phone as well and brick it.

3- With flashtool load MT6753_Android_Scatter TWRP.txt

4- Select download tab and press the download button. Connect smartphone to pc (smartphone must be powered off)… in a few seconds, Flashtool will find your phone and the new TWRP will be flashed.

To restore the original stock recovery, restart from point 1 but replace my recovery file with the stock one.

To reboot in recovery, power off the smartphone, push VOL up + and Power at the same time, Once you see the Ulefone logo, release the 2 buttons. In about 10 seconds, you should be in the TWRP recovery menu.

You are free to try my software but I cannot be held responsible for any damage to your phone. If you do not agree with this, do not install…..MAKE SURE YOU HAVE THE STOCK RECOVERY BEFORE PROCEEDING.

Once completed, you can root your phone by installing (not restoring) with TWRP the archive supersu.zip found here: https://download.chainfire.eu/696/supersu/

Good luck!


PS. I also made a TWRP 2.8.7 version but did not pubish it yet. Not sure I will. If you prefer this version, let me know.

Donate with PayPal to varso

Share Button

※Please make a backup of your device before installing or updating ROM

6 Responses to“TWRP”

  1. Rnet

    Posts: 3

    Thank you!

  2. 11/08/2014
    Posts: 5

    I would appreciate if downloaders report back on the success of the procedure. Thanks

  3. 12/07/2014
    Posts: 1

    Works perfectly, it allowed me to install easily supersu, thx !

  4. 11/08/2014
    Posts: 5

    Great news. I created this TWRP based on the Sept 8th rom. I would like to confirm it works on the Nov 15th rom. I do not see why not but I would love a confirmation on this. What version is your BePro2 runs?

  5. 06/08/2016
    Posts: 1

    thanks it's work for me? where i can find custam rom for ulefone be pro 2

  6. 11/08/2014
    Posts: 5

    Not that I am aware of. It's not Ulefone's flagship and it's not very popular. Too bad because it is a very good phone for the price. As for me, about 1 over 50 phones chineese phones are compatible with North America carriers and it was one of them. Even if a custom rom became available, I would not install it. It works perfectly as it is.

    I did TWRP as I like to play a lot with my phones and I always like to have many full backups in case I loose stablility. I can always go back to a working version.

Leave a Reply

You must be logged in to post a comment.