- Title: Untouched idogx sense 3.5 4-16 BASE [ENG/CHN]
- Listed: 06/28/2014 2:21 pm
- ROM Version: idogx sense 3.5 4-16 BASE
You must be logged for ROM download.
2401 total views, 1 today
1 Total favorites
87 Total downloads
BUGS: Some phone would restart during call if 682Mhz is used,
use default 600Mhz if your phone can't handle overclock
This is untouched idogx rom meaning all apps and framework files are intact no swapping only modded rosie.apk for 4×5 app drawer. Also other files are kept no swap only mod except features below like kernel boot anims, walls etc, are changed for more smoother and cleaner mod. See changes below.
1.s-off (no need to be unlocked) [can be achieved in cellphone shops with XTC-Clip] or unlocked bootloader via htcdev.com – to check fully power off phone or remove battery then put back (HOLD Volume Down+Power Button for 5 secs.) only if shown S-ON with unlocked text or S-OFF this rom can be flashed.
2.sdcard (8GB or 16GB)with 1st fat32, 2nd ext4, 3rd linux swap, partitions
3.download rom manager to install CWM recovery (root required) or follow this guide to install ClockworkMod Recovery
Based on HTC_Marvel_S_GB_S35_BASE_4_16.zip
Root SuperSU Busybox
Cake kernel 122-600Mhz def.
4X5 App Drawer
Black Boot and Down Anims + new boot sound
2024 SD card speed tweak
d33ps1x GPS hack
fixed MNS for google account and other settings.
Pre-installed Apps: (Uninstallable+Updatable)
- Adobe Flash Player 11
- voltagecontrol plus
- es file xplorer
- ics keyboard
- terminal emulator
- dolphin browser
CRT-Animations – newly programmed services.jar from base
ROM install instructions:
1.Download Minitool Partition Wizard and install in PC
2.Put SDCARD in card reader and
make the following Partitions NOTE: it should be in the ff. order FAT32,EXT4,SWAP
Fat32 – Resize this to have unused space of 1500, files won't
be touched or erased in this partition.
3.Make 2nd Partiton Ext4 = 1400 – PRIMARY – this will be your Internal Memory once data2sd is installed later
4.Make 3rd Partition LinuxSwap = 100 – PRIMARY – this will be an extra ram
5.In Minitool Partition Wizard – Click Apply wait to finish
6.Copy ROM to SDCARD, and eject and put inside phone.
7.Boot in recovery
8.Wipe Data, Factory Reset
10.Advance > Wipe Dalvik Cache
11.Go back Install zip from SDCARD
12.Choose the ROM zip then flash.
13.When finished flashing, Reboot system now
14.Wait 4-8 minutes until ROM is fully booted.
15.Reboot to recovery again > don't wipe > install zip from sdcard then choose data2sd zip
16.Then reboot system – This will take time cause files will odex. 4-8mins
17. Once data2sd is installed never remove sdcard. Power it off first if you remove it. Turn on again if sdcard is inserted.
THANK YOU idogx for porting sense 3.5 for our wildfire s
※Please make a backup of your device before installing or updating ROM