Ulefone
  • Title: XuMi Ui 许谧 Rom
  • Listed: 02/12/2014 7:19 pm
  • ROM Version: ROM Android 4.2.1
  • You must be logged for ROM download.



Overall Rating : 26

3114 total views, 1 today

0 Total downloads

  

XuMi Ui 许谧 Rom
XuMi Ui 许谧 Rom - Image 1XuMi Ui 许谧 Rom - Image 2XuMi Ui 许谧 Rom - Image 3XuMi Ui 许谧 Rom - Image 4XuMi Ui 许谧 Rom - Image 5XuMi Ui 许谧 Rom - Image 6XuMi Ui 许谧 Rom - Image 7XuMi Ui 许谧 Rom - Image 8XuMi Ui 许谧 Rom - Image 9XuMi Ui 许谧 Rom - Image 10

Author adMember Info

Daniela


DESCRIPTION


 
 

XuMi Ui Rom

 

 

This is the version to install from CWM recovery

valid for all models of Haipai I9389

 

 

Links to everything that is required for proper installation can be found in the following paragraphs.

 

 

Features of  the XuMi Ui Rom

 

 

This Rom stems from the mix between the porting of a Miui Rom and that of the Sony Xperia Rom
on a base represented by the "Cheetah Rom" which maintains the speed and fluidity.
I changed the boot order to make the ROM even more powerful.

The ROM is multilingual.

 

Follows a list of the main features of the XuMi Ui Rom:

 

*  Root

*  Kernel (boot.img) modified with real support init.d

*  Zipalign at every boot

*  Sqlite optimization at every boot

*  Very smooth, with no lag

*  Absolutely full app in the system

*  Extremely stable

*  Gapps already installed

*  Optimized to the maximum

*  New Boot Animation

*  Mew Logo initial

*  Build.prop optimized

*  Gps.conf optimized

*  Scripts and Tweaks listed in the following section

 

 

 

Scripts & Tweaks

 

After careful selection and long and patient work, in order to adapt to this device and delete all the conflicts I could insert different and will list only the main ones:

*  Adrenaline Engine

*  Loopy Smothness

*  Geeky Engine

*  Net-Fork

*  Supremacy

*  VelocityTweaks

*  SlaidyBoost

*  BeatsAudio

*  CosmisTweak LightSpeed

 

 

Introduction to the installation of the XuMi Ui Rom

 

Before installing the Rom you need to make a backup of your device in case something goes wrong. Do it with MTKDroidTools flashabile with FlashTool.

Those who have already installed the recovery Cwm they can make a second directly from recovery.

For the first, here is a guide to the procedure of backup, for the latest version of MTKDroidTools and drivers necessary for the proper use of the application Backup with MtkDroidTool

Just this already, but if you want here is the guide for the second procedure to install the modified recovery Cwm  How to install Cwm recovery 

 

 

Installing the XuMi Ui Rom

 

 You may have already downloaded the zip file from the link above and copied the zip file in SD card.

Restart your device in Cwm recovery and make a backup of your device.

Then always from Cwm perform a full wipe:

->  Wipe data / factory reset

      ->  Wipe cache partition

      ->  Advanced ->  Wipe Dalvik Cache

      ->  Advanced ->  Wipe Battery Stats

      ->  Mounts and storage ->  format system

      ->  Mounts and storage ->  format EMMC

to make sure you have no problems!

You are ready to install the XuMi Ui Rom from Cwm with the usual:

->  Install zip from sdcard.

After the installation, reboot again into CWM recovery and from here again:

      -> Wipe cache partition

      -> Advanced -> Wipe Dalvik Cache

Reboot and let it load the Rom (the first time it may take 3/4 minutes) and enjoy your new XuMi Ui Rom!

 

Which author of this Rom decline any liability for whatever may happen to Vs device as a result of the flash itself.

If you are afraid, then don't install anything and you will sleep peacefully the night, otherwise you do it at your own risk!

In any case, just do a Nandroid backup before installing anything and every problem should be averted.

 

Resolution of any problems after the installation of the Rom

 

I invite everyone to make a backup.

Only if you have done the backup and you are able to restore the device then you can write me relatively few bugs in the rom or any other problem.

So ATTENTION! … You did not do a Nandroid backup? … You are not able to restore the device? … Well, do not write to me, because I will not answer to you!!

 

Conclusions

 

Enjoy my work. It's really powerful and optimized. Enjoy!!

 

 

I have put, too, the link to the CRT recovery version 2.2, which I made for this device. It 's a good recovery full touch. The features in this link  http://www.needrom.com/mobile/carliv-recovery-touch-2-2-2/

 

 

P.S. I'm Italian and sorry if I have not written in good English


Donate with PayPal to Daniela

Share Button

※Please make a backup of your device before installing or updating ROM


One Response to“XuMi Ui 许谧 Rom”







  1. 08/19/2013
    Posts: 11

    Hello , very nice work, but rom installer, does not allow to reboot in to recovery , and is better to let the system starts once it finishes it installation, you can correct that on your installation script, to let users to decide if will be booted or re-booted in to recovery to finish your instructions, any way, pretty nice work, thank you very much for all your efort. 

     


Leave a Reply

You must be logged in to post a comment.

banner