Ulefone
  • Title: ZOPO ZP980
  • Listed: 05/06/2013 2:57 pm
  • ROM Version: ROM Android 4.2.1
  • You must be logged for ROM download.



Overall Rating : 24

18711 total views, 1 today

3 Total favorites


  

ZOPO ZP980

Author adMember Info

SoCr@Te

  • Listed by: SoCr@Te
  • Member Since: 05/15/0470

DESCRIPTION


ROM ZOPO ZP980 – ROM Android 4.2.1

—————————————————————————————————————————–

Update Officiel ZOPO ZP980 Version: ZP980 20130422-211821

For Optimization Induction, use FTS_upgrade

—————————————————————————————————————————–

ROM Official ZOPO ZP980 Version: ZP980 20130410-140807

Language support: Multilang

 

Install ROM :

To unpack Flash run Flash_tool.exe
Select a the MT6589_Android_scatter_emmc.txt in ROM
Click Flash_tool.exe interface Firmware-> Upgrade

Phone after taking the battery in put something
Connect the data cable
Brush finished with green circles appears

 

Install with SP MDT:

Unpack the archive SP_MDT_exe_v3.1304.00_A2013.02.26.rar and archive with the ROM

1). Turn off the smartphone. Cable is not connected to the computer.

2). Remove the battery and insert it again

3). Connect your phone to a computer cable. The operating system detects a new device

4). Disconnect the cable from the computer.

5). Run SPMultiPortFlashDownloadProject.exe

6). Choose Database Factory menu> Configuration File data source and specify the file MTK_DATABASE.mdb (it is in the folder SP_MDT).

7). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

8). Click File and select the MT6589_Android_scatter_emmc.txt file (it's in the folder with the rom).

9). The other parameters are fixed, as in the screenshot below.

10). Click "Start all".

11). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer, remove and insert the battery and reconnect it to the computer.

12). After (OK) click Stop and disable any phone.

13). Completed.

or

CWM

ROOT:

put supersu_1.25_pro.zip in the sd card in the phone .
To enter in the recovery menu

start the phone in normal mode
-run this program mtkdroidtools
-connect the usb cable and wait for recognize it
-only after run the button down in this program reboot
-and reboot in recovery mode.

enter the menu 'select zip file from sd card 
select the zip file you copied earlier:
root-superuser-xxxxx-zip
and confirmed!

At this point I have root privileges!
Turn off and turn on the phone!


Share Button

※Please make a backup of your device before installing or updating ROM


One Response to“ZOPO ZP980”







  1. 06/06/2013
    Posts: 2

    IS IT WORKING WITH ZP980 2GB/32GB.


Leave a Reply

You must be logged in to post a comment.

banner