- Title: Delicious NOUGAT for U20 Plus
- Listed: August, 2017
- Last modified: 08/18/2017 2:34 pm
- Version: Android 7.0
You must be logged for ROM download.
10792 total views, 2 today
4 Total favorites
OFFICIAL
Member Info
DESCRIPTION
Note 1: Flash with SP FLASH TOOLS (latest)
Note 2: You can REMOVE the CHECKSUM.INI file from the ROM folder in case of problem when flashing.
Note 3: Select "Firmware Upgrade" function of SP Flash Tools
Note 4: Hold down the "VOLUME DOWN" button when connecting Oukitel U20 Plus to computer. Flashing should start…
Note 5: Give me a "Thanks" if you're happy with the provided file 
※Please make a backup of your device before installing or updating ROM
Do you know how to root it?
can you give me the link please?
There are two versions of firmware for which it does not work
The fingerprint you have to download page v3.01
Oukitel official
To sum up, this 7.0 firmware is made for devices which already came, out of the box, with 7.0 pre-installed by factory.
Those who bought this device with 6.0 should stick with 6.0 for now, until factory releases a 7.0 made for their device.
Thank you, pos wanted to know how to install twrp in this update .
How do I go back, for android 6.0? Unfortunately I can not do root in this version;
fingerprint reader not present
no app for fingerprint neither
the new miui is better
Hi, as said above (see previous posts please), Fingerprint works perfect and fingerprint app is preinstalled and working 100%.
This 7.0 ROM is made for phone which came from factory with Android 7.0 preinstalled.
If your phone had Android 6.0, this ROM will work but no fingerprint function.
Please make twrp for this version. My phone shipped with Android 7.0. I found in 4pda but link not valid anymore.
CC:Jemmini
Good afternoon, I installed this rom and I can not get back to android 6.0.
I've tried everything and I can not, the error always occurs:
BROM_ERROR: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H / W] Fail to download DA to baseband chip's internal SRAM!
[HINT]:
1. There is a cable communication problem between Flash Tool and BootROM.
2 . Target might shut down unexpectedly or target lost power supply.
[ACTION]
1. Try again.
2. Proceed H / W checking in cable and target side with port.
3 Monitor if power-drop occured in target side.
Help me please.
hold volume down and plug it on flash tool
Good morning, I've tried this procedure several times and it does not work.
hold both vol down n up together then plug ur usb cable