DESCRIPTION

1. Make sure you have downloaded the Android Driver and SP Flash Tool.
2. Download the Firmware for your Gionee Elife E3.
3. Unzip the downloaded files. You can use softwares like WinRAR or 7Zip to do that, if required.
4. Open “Android Driver Install” and double click on “AutoRun_Install”
5. Disconnect your device from your computer.
6. Open folder named “Flash Tool” and double click on “Flash_tool” application file.
7. Select “Scatter-loading” option on the tool.
8. Select file named “
   MT6589_Android_scatter ” from the firmware folder named
   E3_KK_0102_T8072 as shown below.
9. Click on “Firmware-Upgrade” option on the top as shown below.
10. Connect your Elife E3 with the USB cable provided by “Gionee”, make sure your device is switched off before establishing connection with more 50% battery backup.
11. The upgrade process will be triggered and you would be able to see the following screen.
12. The following screen will appear, on completion of the upgrade.
13. Disconnect device and switch on your device again.

     

    Congratulations! You are now using KitKat on E3!

※Please make a backup of your device before installing or updating ROM