This is the Firmware Already Root for Samsung Galaxy Tab 3 Lite / Tab 3 V ( SM-T116NU ) with usb drivers and Odin_v1.85 (flashing tool)

How to Flash

- Once the download is complete extract to your Drive.

1. Install Galaxy Tab 3 Lite usb driver / Make sure the driver is installed & running Odin ( flashing Tool ).

2. Then create Samsung SM-T116NU in the position in a way Downloading Mode, Turn off your smartphone, press the volume DOWN + Home + Power buttons simultaneously, Continue by pressing Volume UP to get to the download mode.

3. After that connect the Usb cable samsung SM-T116NU you to CPU / Laptop if your device is recognized it will exit this display in Odin, with a sign in blue.

4. If you are connected, click the "PDA" and locate the firmware file that you already estrakt. and make sure the "auto-reboot" and "f. reset time" is checked.

5. If you are sure everything is correct, proceed by clicking the Start button, and wait until the flashing process is completed.

- when the process is complete, it will say "PASS" in the green box and the phone will automatically restart.

6. Finish & Congratulation your Tab 3 V is already root

Thank's for visiting & Good Luck