- Title: Inew V3 umi c1 port KK
- Listed: October, 2014
- Last modified: 10/31/2014 8:14 pm
- Version: 4.4.2 v1.0
You must be logged for ROM download.
21875 total views, 1 today
DESCRIPTION
Here I present you my C1 Modded ota ROM for Inew V3.
It is for the internal /data/media type phones. (with only MBR and EBR1). System is part5 data is part7.
Port 100% from UMI C1 (+some additions)
————————————————————-
Installation
—————
You must first install official KK 1.13 (to make the partitions correct)
If you don't have it I can build a small Flash tool update. —–>Request!
Backup your NVRAM and Sec.ro partitions. (better be safe than sorry!) It can be fixed anyway so don't worry.
Transfer my zip rom to your SD. Insert SD in phone.
First flash my recovery with your favorite program (Mobile uncle or via Flash tool)
Reboot phone , enter recovery.
Press Wipe (Default one wipe data , davlik , cache – BACKUP impotant data , all will be lost) .Return to main menu after finished.
Go to install. Choose storage microSD at the middle-bottom
Select correct zip file from microSD
When finished , return to main menu and POWER off phone
Remove microSD and Start phone. (If you leave it in all applications will install files to that instead of internal – up to you!) You can always choose internal after , I just prefer it this way.
Done!
Rom has native init.d Support , Superuser and partial Busybox (Install busybox from play store and update)
Multilanguage , GREEK support extra! (Sorry for the bootsound )
(I can also provide a complete GPS fix step by step soon , most files are in already)
ADDED 900mhz baseband fix. Boot in recovery and flash baseband900.zip
——————————————————————————————-
Plz donate something for my spent hours over the keyboard
※Please make a backup of your device before installing or updating ROM
How can i flash Recovery without scatter?
Mobile uncle tools!
more screenshots please.
Added more!
Thank's. But interested in a phone book, a screenshot of an incoming call, firmware version, kernel, modem, and menu. Sorry for my EN.
Menu is identical to original V3 kernel is custom 3.4.67 modem is standard V3 850 phone book and incoming calls depend on skin!
thanks BATSILO for this rom,but i found 2 problems in this rom
1 it takes 8 hours to charge from 0 percent to 100 percent(on jellybean it 2 hours from 0 to 100 percent charge
2 when you reboot your phone it take almost 10 minutes for it to connect to network.
but this rom
https://www.needrom.com/downlo.....nto-v1-2000900/
gets network immediately.so try and repair it
You must have the 900 baseband V3 board.
I have uploaded the 900 band modem file. Go to recovery , flash zip and reboot …. let me know!
For the battery problem try flashing you own NVRAM+data from your backup with mtkdroid tools and delete file system/etc/mddb/BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n then reboot
@BATSILOS,PLEASE HOW LONG DO YOUR BATTERY TAKE TO CHARGE,THIS IS WHERE I NEED MORE HELP
THANKS IN ADVANCE
Replace charger and charging cable first and try again! Get a good quality cable (I use my old HTC one)
@ OK THANKS BUT I WANT TO KNOW HOW LONG YOUR BATTERY CHARGES FROM 0 TO 100,IN MY JELLYBEAN ITS 2.30 MINUTES FROM 0 TO 100
Dunno
last few days my phone has been on usb flashing and testing and is almost at 100% all the time 