• Title: Inew V3 Zopo 1000s port
  • Listed: 03/16/2016 8:20 pm
  • ROM Version: 4.4.2 1.2
  • You must be logged for ROM download.

Overall Rating : 67

33089 total views, 1 today

3 Total favorites


Inew V3 Zopo 1000s port
Inew V3 Zopo 1000s port - Image 1Inew V3 Zopo 1000s port - Image 2Inew V3 Zopo 1000s port - Image 3Inew V3 Zopo 1000s port - Image 4Inew V3 Zopo 1000s port - Image 5Inew V3 Zopo 1000s port - Image 6Inew V3 Zopo 1000s port - Image 7

Author adMember Info



Here I present you my Zopo 1000s Modded ota ROM for Inew V3.


It is for the internal /data/media type phones. (with only MBR and EBR1). System is part5 data is part7.

Port 100%  from Zopo 1000s – GESTURES finally work in INEW (See photo)



You must first install official KK 1.13 (to make the partitions correct)

If you don't have it I can build a small Flash tool update. —–>Request!

Backup your NVRAM and Sec.ro partitions. (better be safe than sorry!) It can be fixed anyway so don't worry.
Transfer my zip rom to your SD. Insert SD in phone.

First flash my recovery with your favorite program (Mobile uncle or via Flash tool <—- prefered)

Reboot phone , enter recovery.

Press Wipe (Default one wipe data , davlik , cache – BACKUP impotant data , all will be lost) .Then wipe internal.

Return to main menu after finished.

Go to  install. Choose storage microSD at the middle-bottom

Select correct zip file from microSD

When finished , return to main menu and POWER off phone

Remove microSD and Start phone.

Wait longer than normal , Rom rebuilding data. Done!

Rom has native init.d Support , Superuser and partial Busybox (Install busybox from play store and update)

ADDED FLASH BASE FOR FLASH TOOLS -Not for those who don't know what they are doing!

How to install.

1) Back up your phone with flash tools.

2) Unzip my pack

3) Add inside the unpacked folder my recovery image , named recovery.img

4) Add inside the unpacked forder YOUR nvram.bin and secro.img from your backup from flash tools folder! VERY important as this retains your IMEI! Later you can simply download a newer nvram.bin if needed! Can't give you mine as it contains my Imeis!

5) Load flash tools , load MT6582_Android_scatter.txt from the folder and choose (format all and download) and press Download. ATTENTION this will totally wipe your phone!

6) Turn off your phone , remove battery. Keep it removed!  Connect first usb to PC then to your Phone. It should start downloading the base. Notice you will not have a system , cache and userdata partition yet after it finish!

7) Unplug USB , put battery back on , turn on phone by pressing volume up at the same time. This will take you in recovery. Now , goto wipe , and Advanced wipe. Fist choose system , Swipe to wipe. Then Cache , Swipe to wipe , then go back and format Data , type yes to wipe. This is very important and should be done exactly like this as it formats the blank system.cache.data partitions , making them ready to accept data!

Notice you will now have 1.4gb system , 256mb cache and the rest data!

8) Copy my rom to your SD and follow the step to install via TWRP after you reboot in recovery again (You will have no system yet!)

9) Enjoy new partitions and never loose imei again!


Updated for phones with replaces screen by popular request. Camera set to Inew standards too .

※Please make a backup of your device before installing or updating ROM

Donate with PayPal to batsilos

151 Responses to“Inew V3 Zopo 1000s port”

  1. 08/18/2013


    la rom et elle wdcma 

  2. 08/07/2014


    does it really have air gestures?

    • batsilos



      YEP! Don't expect anything fancy , just turn on and move your hand in front of the front censor (near camera)

  3. 08/07/2014


    they don't work properly you can only go left, doesn't matter what you do. If you swipe left it goes left, if you swipe right it goes left too

  4. batsilos



    That how it works in Zopo …. look also in the demo in Gestures menu!

  5. 08/07/2014


    however this device is not prepared for this technology, you have to be really close for it to function

  6. batsilos



    I can raise the sencitivity in Boot , but not sure of the after-effects.

     chmod 0777 /sys/devices/platform/mt-i2c.0/i2c-0/0-005d/highsensitivity
     chmod 0777 /sys/devices/platform/mt-i2c.0/i2c-0/0-005d/gesture

  7. batsilos



    PS Inew advertized it on sale and never! got it working :D

  8. 08/26/2014


    I have a 4.2.2, 1.1.3 official rom in my inew v3, before install this rom, what kitkat version in this site I have to install?

  9. 08/26/2014



    To flash your recovery can I use the MT6582_Android_scatter of Wisley 1.0.13 rom?


    • batsilos



      Yep , what scatter does is tell the Flash tool where to put the partitiions and how big they will be!

      But they must have be created correctly first! You can't use a different scatter than the one your device has been formatted to , or you will mess up your data! That why I say first install 1.0.13 to set the partitions correct! (4.2.2 roms have too small boot and recovery partitions!)

  10. 04/25/2014


    Hi. ROM works ok. Had to restore IMEI. Nice rom, don't like the Chinese bootsound. Gps of course is not working. Now I have the phone out in the open air  and pray it locks any satellites. 

Leave a Reply

You must be logged in to post a comment.