• Title: Lenovo VIBE X2
  • Listed: 04/10/2016 2:43 am
  • ROM Version: 5.0
  • You must be logged for ROM download.

Overall Rating : 16

11031 total views, 3 today

14 Total favorites


Lenovo VIBE X2

Author adMember Info


How to Flash Lenovo VIBE X2 Stock ROM:

Note: Keep in mind that prior to flash check out the battery time. It should be 70-80% charged. Backup your device data including personal data before flashing or installing firmware on your device.

Step 1: Download Lenovo VIBE X2 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).

Step 2: Download Lenovo USB Drivers in install in PC. If already installed quit this step.

Step 3: Power Off / Switch of your smartphone (it is better to remove battery after switching if possible)

Step 4: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.

Step 5: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.

Step 6: Connect your device with PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.

Step 7: Wait Until process complete. In end of Successful Flash Lenovo VIBE X2 Stock ROM Firmware, a Green dot / ring will appears.

Share Button

※Please make a backup of your device before installing or updating ROM

18 Responses to“Lenovo VIBE X2”

  1. 04/22/2015
    Posts: 5

    can not download(
    whether there is a mirror?

  2. 05/19/2015
    Posts: 2


    Can you say us if it's for X2-TO or…???, thanks a lot!!!:(

    • 05/19/2015
      Posts: 2


      Hey, this is not Lollipop, you can find android version 5.0 at: https://www.needrom.com/downlo.....d/lenovo-x2-ap/, so that rom is only por AP version, you can fhash it in your TO Cellphone, when you have the system ok, you must to root (you can root it with kingroot), from a rom for TO version extract  modem_1_lng_n.img and rename it to modem_1_lwg_n.img, navigate to /etc/firmware and replace it, reboot and verify if your cellphone shows two signal icons doesn't matter if you have signal at this moment, verify with *#06# if you have correct IMEI numbers. If you have wrong IMEI's you must to install tool hero, that programa will helps you to restore IMEI.

  3. 04/13/2016
    Posts: 2


    So is this Android 5.0 or 4.4.2 still? After flashing this it's still showing as 4.4.2

  4. 04/19/2014
    Posts: 8


    Does it contains GApps?

  5. 04/15/2016
    Posts: 4

    United States

  6. 09/14/2015
    Posts: 2


    To nie jest wersja 5.0, to jest wersja 4.4.2 i to stara wersja :(

  7. 04/29/2016
    Posts: 1


    can i use it in vibe x2-CU?

  8. 07/20/2013
    Posts: 2


    Hey guys whats up..

    Is there anyone smartenough to advice
    me that could this rom be installed on
    on Infocus M530 or not since they
    both share the same specs.

  9. 02/17/2015
    Posts: 2


    Hi, this ROM is dual sim enabled?

  10. 08/26/2015
    Posts: 18




Leave a Reply

You must be logged in to post a comment.