- Title: Marsapa rom KK v4
- Listed: July, 2014
- Last modified: 07/12/2014 3:01 pm
- Version: 4.4.2
You must be logged for ROM download.
31246 total views, 6 today
28 Total favorites
Member Info
DESCRIPTION
V4 based on STock 4.4.2 of ZP998
changelog:
all of the V3 +
viper4android functioning;
smart flip cover operated;
@ Mailk. apk stocks;
new sony walkamn player;
removed some tweks scipts and that created problems;
new default wallpaper;
N.B. to have access to the full root I used the procedure fanka, to remedy any problems I set the automatic connection to the PC as MTP, do not try to change from MTP to USB storage because it does not work.
fix dialer for smart flip cover: https://mega.co.nz/#!yEJT2KwZ!gAUagTKoQmdTFdR_rKzjbeSYWJ3OncW7tizclU__GNE
fix face unlock : https://mega.co.nz/#!qcwWVTxB!9qmSvSGIJzSXPzQJPtYiE-GNuOhAapkpVkGLoIJsAeY
GUIDE FOR INSTALLING CUSTOM ROM + RECOVERY AND MODIFIED ROOT ON PERMITS
1. Download, your choice A) kk stock ROM package from the official site http://pan.baidu.com/s/1pJDJZ1D Stock 4.4.2 ROM package for Komu K8 http://www.komu.it/download-KitKat-k8.php I opted for the latter because I found it more complete but, again, it's the same thing. I recommend: Unzip the archive, because the genius who writes performed the procedure directly using the archives in zip or rar, complaining that FT did not work!! Another recommendation: no need to copy anything in the cell, you do everything from your PC. Third recommendation: DO NOT connect the cell to the PC until you've read the whole paragraph 6.
2. Package A) is located in the beautiful ROM ready with in the scatter file to set ad hoc FT (download separately); in B) are driving in pdf, Flashtool (FT) and, above all, the ROM with beautiful ready in the scatter file to set ad hoc FT.
3. At this point, once set FT, you could install one or the other stock ROM (for the KK Komu works perfectly on Zp998) but then it may be difficult to change the recovery with a modified gain root permissions (at least, I have had no problems). So little trick (thanking the good FlashNoob98) …
4. To work around this problem just replace the original recovery (recovery.img file inside the folder of the ROM A or B) another recovery of those "modified". In this forum you will find several.
5. In my case I used "ZOPO_ZP998_PhilZ_6.47.7_KK_by_SevenMaxs", by copying the file recovery.img and also the META-INF folder (do not know if they serve but I have put and it went well!).
6. Start FT caricateci the scatter file that you find in the ROM, and if it has not done FT automatically, check the dates on all the lines that make up the list. As an option from the menu on the left choose "Firmware upgrade". Now press the download button FIRST, THEN connect the terminal to the PC, without battery, with the USB cable. I have read that it would be appropriate to also remove the SIM card and SD (I have not done).
7. Wait until the end of the process (a bell'OK) FT close and disconnect the cell. Restart and you have installed the kk ZP998 or Komu K8 with recovery changed.
8. From here it is a moment to install a custom ROM, just copy the entire file on the SD card and restart the phone in recovery mode (vol up + power button, connected to the PC). The procedure is very straightforward: it is to install a zip or rar file (the file consists of the ROM you copied to your SD).
※Please make a backup of your device before installing or updating ROM
@ marsapa
GOOD guide 4 install
just 2 be sure
as i have understood post , i have to do first install via flash tool one of the two STOCK ROMs and modd recovery
and after this process install your update
I hope i understood it well ? is that right marsapa
THX 4 response
it is recommended not mandatory, many passing by jb at KK had problems, thus making it cleans everything and prepares the basis for the Roma KK
10x
Maybe someone knows the link for flashtool for KitKat ?
https://docs.google.com/file/d.....FdoWm1uY0U/edit
use File->Download
or
Ctrl+S
Thank U
Installation of Komu KK firmw. via Flash tool went without problems
like instructions above, just not selected firmware upgrade ( shown an error) (maybe it's i've formatted??) just checked download, it finished and its OK
THX marsapa 4 INSTRUCTIONS
goin' to install marsapa's ROM
Installed Marsapas ROM
without problems, just followed instructions (Aroma)
ROM started , goin' to use it
THX marsapa 4 ROM & Instructs
Hi guys, Is possible KK for Zopo 980+ ??? When ??? Thanks
is possible rom KK for zp990+ ???? thanks
Marsapa where I can find the file ZOPO_ZP998_PhilZ_6.47.7_KK_by_SevenMaxs?
I've searched in Russian and Chinese web siets without the possibilities to download it (it was a missing file)
Thanks
Idea
https://www.needrom.com/mobile.....for-zopo-zp998/
How can I change System font from italic font to normal font?
@marsapa
Could you please answer this question? I would like to get the normal non-italic font. Thank you.
ROM looks great. But that italic font…
I am using komu kit kat.can i install marsapa v4 rom directly from recovery.
yes