- Title: Marsapa rom KK v4
- Listed: July, 2014
- Last modified: 07/12/2014 3:01 pm
- Version: 4.4.2
You must be logged for ROM download.
31246 total views, 6 today
28 Total favorites
Member Info
DESCRIPTION
V4 based on STock 4.4.2 of ZP998
changelog:
all of the V3 +
viper4android functioning;
smart flip cover operated;
@ Mailk. apk stocks;
new sony walkamn player;
removed some tweks scipts and that created problems;
new default wallpaper;
N.B. to have access to the full root I used the procedure fanka, to remedy any problems I set the automatic connection to the PC as MTP, do not try to change from MTP to USB storage because it does not work.
fix dialer for smart flip cover: https://mega.co.nz/#!yEJT2KwZ!gAUagTKoQmdTFdR_rKzjbeSYWJ3OncW7tizclU__GNE
fix face unlock : https://mega.co.nz/#!qcwWVTxB!9qmSvSGIJzSXPzQJPtYiE-GNuOhAapkpVkGLoIJsAeY
GUIDE FOR INSTALLING CUSTOM ROM + RECOVERY AND MODIFIED ROOT ON PERMITS
1. Download, your choice A) kk stock ROM package from the official site http://pan.baidu.com/s/1pJDJZ1D Stock 4.4.2 ROM package for Komu K8 http://www.komu.it/download-KitKat-k8.php I opted for the latter because I found it more complete but, again, it's the same thing. I recommend: Unzip the archive, because the genius who writes performed the procedure directly using the archives in zip or rar, complaining that FT did not work!! Another recommendation: no need to copy anything in the cell, you do everything from your PC. Third recommendation: DO NOT connect the cell to the PC until you've read the whole paragraph 6.
2. Package A) is located in the beautiful ROM ready with in the scatter file to set ad hoc FT (download separately); in B) are driving in pdf, Flashtool (FT) and, above all, the ROM with beautiful ready in the scatter file to set ad hoc FT.
3. At this point, once set FT, you could install one or the other stock ROM (for the KK Komu works perfectly on Zp998) but then it may be difficult to change the recovery with a modified gain root permissions (at least, I have had no problems). So little trick (thanking the good FlashNoob98) …
4. To work around this problem just replace the original recovery (recovery.img file inside the folder of the ROM A or B) another recovery of those "modified". In this forum you will find several.
5. In my case I used "ZOPO_ZP998_PhilZ_6.47.7_KK_by_SevenMaxs", by copying the file recovery.img and also the META-INF folder (do not know if they serve but I have put and it went well!).
6. Start FT caricateci the scatter file that you find in the ROM, and if it has not done FT automatically, check the dates on all the lines that make up the list. As an option from the menu on the left choose "Firmware upgrade". Now press the download button FIRST, THEN connect the terminal to the PC, without battery, with the USB cable. I have read that it would be appropriate to also remove the SIM card and SD (I have not done).
7. Wait until the end of the process (a bell'OK) FT close and disconnect the cell. Restart and you have installed the kk ZP998 or Komu K8 with recovery changed.
8. From here it is a moment to install a custom ROM, just copy the entire file on the SD card and restart the phone in recovery mode (vol up + power button, connected to the PC). The procedure is very straightforward: it is to install a zip or rar file (the file consists of the ROM you copied to your SD).
※Please make a backup of your device before installing or updating ROM
@marsapa Thanks for dialer fix but what it fix exactly?
yes now is ok and there is fix per face unlock
@marsapa -what dialer fix do exactly I installed it and see no difference ?
Marsapa, I asked "
I’m using Franka’s kk ROM and Philz’s 6.47.7. Can I just flash this ROM from SD card?" You said yes but now that response is gone. So is it possible or not?
the problem is that the partition between jb and kk are different, so you can flash from recovery if you do the division always with my rom before installing it.
I tried to flash but it failed. I will try and understand what you meant by "division" and try again.
@marsapa
How can I change the italic system font into normal one? Thank you.
Sorry,
this original rom based, have the same porblems with wifi often disconnected?
Same here lots of disconnects with wi-fi. Same on other KK roms.
It seems to be a smooth rom, i Installed it yesterday so i havn't tried it for long. I skipped the install instructions and flashed the rom directly from Philz touch, i have not found any major system problems yet…
Gb kk doesn't work all functions yet but apart from that it works fine i think. Smart wake does'nt work either, need to update drivers? Gps working, it took quite some time to get a fix though, even though i used faster gps to change region to sweden.
the same to me
GB not all , what works , works good
Smart wake i have only double tap
Smart wake not functioning for me…
great rom everything runs top
thank marsapa
Has someone fixed smartwake????? and Gesture sensing??
Has this something to do with touchscreen drivers?
I have only double tap screen to wake up
THX for response
@ marsapa
DO i have to update touchscreen drivers ?
I dont which driver version is installed on your ROM?
I have one on version ( ZP998_V36_2014210_app.bin)
I dont know is this OK? or is this version V36 maybe installed on ROM
Thank you for response marsapa
With V37 smart/gesture will work.
here is a tutorial. read it carefully before you start and you have to use an OTG cable with mouse connected. (do not touch the screen while update)
http://forum.zopomobileshop.co.....d-2401-1-1.html
if you update this in the wrong way your screen will not work anymore. Good luck.
you must update your driver to V37.
I recommend you use OTG cable and a mouse
Marsapa, is it possible to have touchscreen drivers updated in an upcoming update?