• Title: MIUI8 6.6.30
  • Listed: 07/02/2016 1:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 53


45548 total views, 1 today

41 Total favorites

  

MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info

Vell


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Vell


499 Responses to“MIUI8 6.6.30”



  1. Vell




    08/16/2014

    Russian Federation

    MIUI7 5.11.19 v23 now released!
        [U] Base firmware changed to 5.11.19
        [+] Added kernel with swaped SD memory for C2/980

  2. Dave@NeedRom




    02/06/2014

    Germany

    Thx for the update Vell, everything is working perfect so far. Even the daily loockscreen wallpaperchange is back again :) Update via twrp did work without Problems. 





  3. 09/21/2013

    Greece

    Well, finaly i install the rom…its very nice, not perfect(i confirm the lag on gallery) but i love it! Thnx a lot. Keep the good work Vell!

    • Dave@NeedRom




      02/06/2014

      Germany

      Try the "Piktures"  or "A+ Gallery"  from playstore. much better as the buildin gallery. But in the description it is say'd, that the build in gallery are verry laggy. This is because of the original xiaomi rom. Vell can't do nothing i think.

      I use this Rom in daily use, and i dont go back to a other Rom. 

    • Vell




      08/16/2014

      Russian Federation
      That's right, Dave, I can't fix the gallery. I myself use QuickPic
  4. Dave@NeedRom




    02/06/2014

    Germany

    Thx Vell for the hint with the QuickPic Gallery. I try it out, and it's fast so far :)

    Why u don't take the gallery from the Cancro Rom build? Or is this gallery incompatible to our?

    • Vell




      08/16/2014

      Russian Federation

      I take the gallery from the Cancro Rom. this gallery is work on HMW, but have the same lags :(

  5. Dave@NeedRom




    02/06/2014

    Germany

    Ah, okay, did'nt know. Well, we have some nice alternatives :)

  6. Vell




    08/16/2014

    Russian Federation

    MIUI7 5.11.26 v24 now released!
        [U] Base firmware changed to 5.11.26





  7. 12/28/2013

    Hungary

    Thank you!





  8. 09/21/2013

    Greece

    How to change pattern from Private Folder using File Explorer app?? Im sure i use the right pattern but still say wrong pattern….that happen aftrer update the rom  with last update……

  9. avitoul




    07/07/2014

    Greece

    Just installed on a Zopo 980 2/32GB with 1GB/5GB Partitions, excellent work it seems to work fine and fast, the installation procedure is awesome compare to what i am used until now WELL DONE VELL !!, waiting for any updates. 





  10. 09/01/2014

    France

    Hi everybody!

    I followed step by step on my ZP990 to install this ROM but I have the same error :

    Installing system
    Android 4.4.2 KitKat
    symlink : some symlinks failed

    I looked in the log and saw that there was not enough space on /system.

    I installed zip file partition for my ZP990 but it failed with status 6.

    Any idea please ? Thanks!

    • Vell




      08/16/2014

      Russian Federation

      watch description

    • Dave@NeedRom




      02/06/2014

      Germany

      to "hsmr"

      Expand System Partition like Vell say'd….Plz read the description. It is simple and works. Did it myselfe on a ZP980 2/32. No Errors. Install of the ROM works everytime. Install as a update (to keep u'r apps and date) works realy good and everything after the flashing is where u left it ;) u only need to go into advanced tab from the wipe menue and select dalvic and cache to wipe it…after it, make a reboot into recovery and flash ROM Update. For a clean install make a factory wipe… thats it. Simple and it works.


Leave a Reply

You must be logged in to post a comment.