• Title: MIUI8 6.6.30
  • Listed: 07/02/2016 1:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 53


46309 total views, 2 today

41 Total favorites

  

MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info

Vell


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Vell


499 Responses to“MIUI8 6.6.30”



  1. Vell




    08/16/2014

    Russian Federation

    MIUI7 5.12.3 v25 now released!
        [U] Base firmware changed to 5.12.3

    souits, in changelog [File Explorer]
    Optimization – 'Forgot password' option will show after entering wrong password for private folder repeatedly (12-02)
    Fix – Unrecognizable file names after ZIP files are decompressed (11-30)





    • 09/21/2013

      Greece
      in pleasant that dealt with my πroblem ... but the problem is resolved ; or just any time you do restart the mobile should I retrieve password ;




    • 09/21/2013

      Greece

      And one more bug….in Boom Beach game from Supercell, after 5.11.26 update show some texture like broken..it is a graphics bug….i dont know more about that…. 





    • 09/21/2013

      Greece

      well i reinstall clear the rom and boom beach work gr8, and the file manager work for now gr8 with new 5.12.3 rom. only the gps have a little divergencefrom real position.





  2. 02/17/2015

    France

    did someone make an overclock of Zopo C2 quad Core 1,2Mhz using this ROM ?





  3. 09/01/2014

    France

    To "Dave" and "Vell"

    How to extend the System to 1Go ?

    I downloaded "System1Gb-Data5.0Gb.zip" file and put it on my external SD.
    I installed it like a ROM by choosing in Recovery Mode "install zip" file and in process. Then when I process to step 5

    5. Install zip file with the partition type,

    it return me

    "E: Error execution updater binary in zip '/sdcard/System1gb-Data5.0Gb.zip'
    Error flashing zip '/sdcard/System1gb-Data5.0Gb.zip'
    Updating partition details…Failed

    I dont' understand why I doesn't work.

    Thanks for help.

    • Dave@NeedRom




      02/06/2014

      Germany

      Try to put this zipfile into the internal sdcard, not in some folders, put it in root of the sdcard. I did remove the external sdcard. The file you try to install works on 16/32gb phones only. If u have a 4gb Phone u need to use c2-4gb file. And do not forget these restarts, they are important.  





  4. 09/01/2014

    France

    Thanks Dave, but it does not work.
    I put the Zipfile into /sdcard, /emmc, / but I have the same error :

    E:Mount: Unable to find partition for path '/sdcard/System1Gb-Data5Gb.zip'
    Error flashing zip '/sdcard/System1Gb-Data5Gb.zip'.

    or

    E:Mount: Unable to find partition for path '/emmc/System1Gb-Data5Gb.zip'
    Error flashing zip '/emmc/System1Gb-Data5Gb.zip'.

    or

    E:Mount: Unable to find partition for path '/System1Gb-Data5Gb.zip'
    Error flashing zip '/System1Gb-Data5Gb.zip'.

    My Zopo ZP990 is a 32Gb model





  5. 09/01/2014

    France

    I found my fault. Excuse.
    My Zipfil was corrupted.

    I have do all step by step. After reboot on last step, the phone display the Zopo logo and then nothing.

    • Dave@NeedRom




      02/06/2014

      Germany

      Try to start into recovery. In recovery mount the System partition. Plug the Phone to the PC and Format the System Partition. Or do another wipe of the partitions written in the guide in the description. Then you need to copy the Rom zip file to ur Phone. U can do this via PC, but dont forget to mount as USB-something (can’t remember the correct word).





  6. 09/01/2014

    France

    Thanks! It works.
    I have something which is not normal. When I install another custom ROM like KitKat, and plug phone to my PC, it is recognized automaticaly by eRoot and I can root my Phone. With Miui ROM, when I plug phone, it is not recognized and I can not root phone with eRoot.

    How to root phone with this Miui ROM by another way ?

    • Dave@NeedRom




      02/06/2014

      Germany

      Start the app that needs root. Close the app. Go into the security app of Miui. There you have a button in the bottom right corner (a star icon in base theme) tab it. There you have the root right button, tab it and give ur app the root access by enabeling it. You dont need a extra program to root ur phone. Miui has a build-in root :)  

      Verry Nice that it works now. I hope you will have much fun with miui. Everything should work, test it out. Calling, messaging, BT, WiFi, compas, camera… Test everything. 





  7. 09/21/2013

    Greece

    hi, how can sort(e.x. by alphabetical or by created date) the shortcut in main screen?

    • Dave@NeedRom




      02/06/2014

      Germany

      Well, that is a question I can’t answer. I make some folders on my home screen, and put the apps in it. But only apps I need each day. Other apps I move to the second screen.

  8. Vell




    08/16/2014

    Russian Federation

    MIUI7 5.12.10 v26 now released!
        [U] Base firmware changed 5.12.10
        [O] optimized work init.d

     

  9. Vell




    08/16/2014

    Russian Federation

    Original post

    Experimental patch for HD (720×1280) mode
    Only for 5.12.10
    Only for boot C2-A-Norm-SD0

    All changes at your own risk!
    Do not forget to do a full backup!!!

    Special thanks mihei78 for HD mode
    Experimental patch for HD mode 5.12.10
    MD5: 52c3c448e3430dcd8b410b8b1bb61347

    Set top of 5.12.10
    After installation, be sure to wipe cashe and dalvik
    When you first boot screen shifted, reboot into rekaveri and again wipe cashe and dalvik

    Blur in the notification bar is shifted (and if you take a screenshot, it's OK)





  10. 10/27/2015

    Russian Federation

    I like this ROM very much. But I have some troubles with it. First of all, it shows me only 1gb of RAM.I have a ZOPO ZP980 phone with 32gb of storage place and 2gb of RAM. And offficial gmail app stoped working. All other is fine.

    • Dave@NeedRom




      02/06/2014

      Germany

      Hello Sequenze,

      "Regardless of the amount of RAM in the properties shows 1Gb, but uses all available RAM." -> as written in the "Known issues"

      Trust me, i use the same phone (2/32). It uses all of the 2 GB RAM. Install the App: SystemPanel Lite and take a look at the Ram usage….it shows u the % of ram used and free…and shows u how much GB or MB are aviable. Now use a Calc and type in the (aviable RAM * 100 / % of free RAM) like in my case atm: 270.6 * 100 / 14 = 1932.85 MB of RAM in total. The numbers vary some because the aviable RAM are'nt exactly the % numbers ;)

      The problem with the original GMail App i can't reproduce. I have installed it right after your post and it works for me. i made a account to test it and it works too.

      Did u install this ROM after a factory reset? Or did u use other apps that could maybe block the Gmail app?

       


Leave a Reply

You must be logged in to post a comment.