• Title: MIUI8 6.6.30
  • Listed: 07/02/2016 1:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 53


45721 total views, 5 today

41 Total favorites

  

MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info

Vell


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for –°2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Vell


499 Responses to“MIUI8 6.6.30”







  1. 09/01/2014

    France

    Hi!

    I have the 5.12.17 version and it works fine but I have somme troubble. When I connect phone to pc with usb cable, it's just charge. How I can mount phone and sd card storages on pc with usb cable please ?

  2. Vell




    08/16/2014

    Russian Federation

    Attention!
    In all firmware from HD mode occurs an incorrect return to FHD mode. Installation kernels in HD mode - not recommended!

    • Vell




      08/16/2014

      Russian Federation

      Fixed:

      In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

  3. Vell




    08/16/2014

    Russian Federation

    xiaomi.eu
    Velld said: ↑
    for HM2013023 you make a rom?

    Not this week..

    5.12.31 will be not released

  4. Vell




    08/16/2014

    Russian Federation

    Wishing you all the blessings of the New Year…the warmth of home, the love of family and the company of good friends.
    Happy New Year to all.

  5. Dave@NeedRom




    02/06/2014

    Germany

    Happy new year to you too, Vell, and all the others here with Zopo phone :)

  6. bitman




    02/03/2014

    Italy

    Hello, I installed the rom 05.12.24 is on zp990 that zp980, restart the cell locks the screen I Cloud that crashes and requires me configuration again, same thing if I try to skip the setting of Mi Cloud who can 'help me? What should I do

    • Vell




      08/16/2014

      Russian Federation

      It happens on some versions of firmware. Try to get first initialization of the English language, and then in the settings, select your own language.

  7. Vell




    08/16/2014

    Russian Federation

    MIUI7 5.12.31 v30 now released!
        [U] Base firmware changed to 5.12.31
        [+] Added kernels by dreamer7
        [O] It changed the way replacement of swap SD card, now works with any kernel
        [F] A temporary solution to switch between HD and FHD mode (requires 2 restarting the phone)
        [O] Optimized setup menu





  8. 03/21/2015

    Chile

    Excelente Vell!!! Cada vez mejora mas la rom!

  9. Vell




    08/16/2014

    Russian Federation

    Info:

    dreamer7 build a kernel with a few advanced features:
    - VM Dirty ratio tweaks
    - Added frandom driver
    - Faster NOATIME and NODIRATIME mounting flags
    - Asynchronous I/O latency to a solid-state disk greatly increased
    - Compile vfp with neon
    - Random: Entropy tweaks
    - CPU governor added – ZZMOOVE (Default)
    - New IO Schedulers added – ROW, ZEN, SIO (Default SIO – 1024)
    - Intelli_plug driver (by @faux123) – An interesting thing which is now engaged in enabling and disabling cores (support profiles and some settings), also allows you to set the frequency in offscreen mode (754 instead of 1209 exhibited in the standard)
    - Optimized ARM RWSEM algorithm(by @faux123)
    - added multi core saving mode
    - Sweep2Wake, Sweep2Sleep – disabled at the kernel level
    and a lot of other patches …

    Recommended application to configure the kernel features – Kernel Adiutor





  10. 05/14/2014

    Germany

    Hi Vell,

    works fine on my Zopo C2 (A, 1GB RAM/16GB ROM) so far – good work.

    I had some difficulties to extend the system partition as the linked forum post is in Russian. Could you also offer the current files on this site here?

    There is a bug in the latest nightly MIUI version: After the first boot on a fresh installation, in the wizard you are asked to create or log in into a MI account. If another language than English is selected and you skip this step, the setup fails. As workaround just select English language in the setup and change the language afterwards. It's a known bug.

    Is it possible to change the kernel without a full wipe? Which kernel do you recommend?

     

    Thanks for your work.

    Best regards

    • Vell




      08/16/2014

      Russian Federation

      I know this bug and wrote about this in the Known issues
      – If you have a crashes in the first initialization, try to get first initialization of the English language, and then in the settings, select your own language.
      This error occurs due to minor errors of translation. Therefore, when the English language error disappears.

      To the originalRepartition files from SevenMaxs i provides links ‚Äčtoday.

      Thanks for your feedback

       


Leave a Reply

You must be logged in to post a comment.