Welcome, visitor! [ Register | Loginrss

  • Title: MIUI8 6.6.30
  • Listed: 07/02/2016 1:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 53


46396 total views, 7 today

41 Total favorites

  

MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info

Vell


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Vell


499 Responses to“MIUI8 6.6.30”







  1. 10/01/2014

     Hello  Vell, congratulations on the exelente work.

    after many tests and much more learning (i has just a normal phone user), I finally managed to extend sytem partition using 1Gb-DataStock.zip [ whith TWRP 2.8.0.0 work for me] in order to install your room .
    Although not yet have explored and tested completely. I am very enthusiastic so far. As I am of photography lover I installed google camera and snap camera apk , and noticed that it is not possible to change the video size and there are an few options photo size. it is possible to do something to change this?
    it is possible to increase the volume of calls and call on loudspeaker?

    • Vell




      08/16/2014

      Russian Federation

      Yes, google camera do not have such options.
      And with snap camera no problems!
      In other settings, it should be check the advanced settings, then select the video settings in the desired resolution.

      call Volume on loudspeaker really quiet. We must try to adjust through the engineering mode.

  2. Vell




    08/16/2014

    Russian Federation

    MIUI7 6.1.7 v30 now released!
        [U] Base firmware changed to 6.1.7
        [O] Some changes in install menu

  3. Dave@NeedRom




    02/06/2014

    Germany

    "blob2.zip" ?? :) nice name for the new Firmware :)

  4. Dave@NeedRom




    02/06/2014

    Germany

    Will try to test the new Version tonight. Thx Vell for your hard work. 

  5. Dave@NeedRom




    02/06/2014

    Germany

    So far everything seems to work. Did some testing with GPS and BT too, everything is working verry nice. 





  6. 03/21/2015

    Chile

    I can update this rom without hard reset, etc.?

    • Dave@NeedRom




      02/06/2014

      Germany

      If u have running this rom in a previous version, than u can update it without loosing ur aps, only thing u need to do is: in recovery do a advanced wipe – > select dalvik cache and cache… Wipe them… Install the new version of the rom and follow onscreen instructions. After successfull install u make a system reboot… Wait some an that's all… Only thing is, that after the reboot u have the base theme as actual… Select ur theme if u had a other. Hope I could help. 

    • Dave@NeedRom




      02/06/2014

      Germany

      Forgot to say: plz make a backup in twrp before u start wiping…. It helps a lot…. Trust me, I know what I'm talking about. Sometimes the zip may not be cpoy'd correct to ur internal sd and than u can recover from ur backup. 

    • Vell




      08/16/2014

      Russian Federation

      Update is possible without a full reset.
      Make a full backup in TWRP.
      To update the firmware simply run the installation in TVRP, after the installation click the wipe cache / dalvik cache button.





    • 03/21/2015

      Chile

      Thanks

  7. Vell




    08/16/2014

    Russian Federation

    MIUI7 6.1.14 v31 now released!
        [U] Base firmware changed to 6.1.14
        [O] Some changes in install menu
        [-] ViPER4android deleted





  8. 01/19/2014

    Turkey

    I have a zopo 2\32 and i have just installed System 1Gb-Data10.zip with twrp. i appled step 1 and step 2 when pass the step 3 its just stop the bootscreen. İt's stuck on bootscreen then ı tryed to install orjinal zopo 980h rom with flashtool. it didnt instal the rom. İt gives pmt changed for the rom; it must be downloaded. What should ı do?

    • Dave@NeedRom




      02/06/2014

      Germany

      What step's did u mean, the steps for the extend system partition or to install the ROM? If u mean the extended System partition steps, then u need to restart into Recovery, not reboot the system… your System Partition got formated after installing the extend system zipfile. Try to press Vol-up and Power to get into recovery and follow the next steps. Questions?…plz write down, we try to help you.





  9. 01/19/2014

    Turkey

    Yes, i mean extend system partition steps. İ think i have problem with recovery. İ installed the system 1gb-data10gb zip on my phone with twrp and it automaticly restart it into recovery i saw notification on screen. Then its stuck on bootscreen. Now iam seeing just zopo logo on my screen. 





  10. 01/19/2014

    Turkey

    Thx for everything. Rom is work great.


Leave a Reply

You must be logged in to post a comment.