• Title: MIUI8 6.6.30
  • Listed: 07/02/2016 1:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 53


45885 total views, 5 today

41 Total favorites

  

MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info

Vell


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Vell


499 Responses to“MIUI8 6.6.30”







  1. 01/17/2016

    Netherlands

    Can somebody help me please ?

    when i do this :"1. Take the patch from the folder "Patches for Recovery", for example, System 1Gb-DataStock.zip, copy it to the SDcard (extSDcard – a removable SD flash drive and nothing else!).

    2. Install it through Recovery (I recommend CWM 6.0.4.4).

    3. Reboot again in recoveri and format partitions System, Cache, Data.

    4. Connect your phone to your PC, go to the Recovery section mount, and mount intSDcard – internal memory as a USB-drive to your PC.

    And with the PC format the intSDcard – internal memory in fat32 (cluster size you can leave the standard).

    5. Repartition passed.

    Restoring from a backup you firmware or install the new"

    i install this patch 

    and after instal it phone will rebot and doesn't go into recovery

    only stay on ZOPO logo

    so i think it need new rom so I install new stock rom and then everything back to this same size partition wich was before patching

  2. Vell




    08/16/2014

    Russian Federation
    remove the battery and insert it, connect charger, hold power on and volume +

     





  3. 01/17/2016

    Netherlands

    it work's thank's now I instaled but have problem with imei. i was in enginering mode but cds information are disabled. what can i do with this ?

  4. Vell




    08/16/2014

    Russian Federation

    кestore nvram from you backup





  5. 01/17/2016

    Netherlands

    from trwp ? i'll try but nothing changes

  6. Vell




    08/16/2014

    Russian Federation

    Try to flash in SPFlashTool only SEC_RO partition, and then restore from a backup of the NVRAM, if that doesn't work, look for forums in your language.

     

  7. Vell




    08/16/2014

    Russian Federation

    Hey MIUIers,

    Next week we will be celebrating our traditional Chinese New Year, and of course there will be a holiday. So the MIUI update during the holiday time will have some slight changes. Detailed arrangements are as follwing:

    MIUI Global developer version public update will be back to normal from 6.2.15.

    MIUI Global developer version beta update will be suspended from 6.2.4 to 6.2.12. The update will be back to normal from 6.2.16.



    MIUI China developer version public update will be suspended for 6.2.4 and 6.2.11. The update will be back to normal from 6.2.18.

    MIUI China developer version beta update will be suspended from 6.2.1 to 6.2.12. The update will be back to normal from 6.2.15.





  8. 09/17/2014

    Czech Republic

    HI Vell,

    thx for great ROM but I miss one fuction – when I connect to USB I have only MTP and PTP. Function only charging would be welcomed.





  9. 06/05/2014

    Spain

    Still not working 3g for the second SIM card?

    Thanks,

  10. Vell




    08/16/2014

    Russian Federation

    Known_issues_when_run_on_ZOPO_phones:

        – You can't OTA upgrade firmware! You download firmware for Xiaomi phone, and we have ZOPO.
        – 3G Internet only works on the first (small) SIM card.
        – Very strongly lags the built-in gallery (problem inherited from Xiaomi Red Rice).
        – Regardless of the amount of RAM in the properties shows 1Gb, but uses all available RAM.
        – ART does not work properly on this firmware.
        – Bluetooth not works with some devices
        – In HD mode blur in the notification bar is shifted (and if you take a screenshot, it's OK)
        – In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.
        – If you have a crashes in the first initialization, try to get first initialization of the English language, and then in the settings, select your own language


Leave a Reply

You must be logged in to post a comment.