• Title: MIUI8 6.6.30
  • Listed: 07/02/2016 1:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 53


46138 total views, 1 today

41 Total favorites

  

MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info

Vell


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Vell


499 Responses to“MIUI8 6.6.30”



  1. Dave@NeedRom




    02/06/2014

    Germany

    Installed the V42 without any problems. Installed it as update like I ever do. Only wiped cache and dalvic, did a twrp reboot and installed the new V42. Got no bootloop, everything seems to work so far.

  2. Dave@NeedRom




    02/06/2014

    Germany

    Okay, tested the new Rom a bit more. Only thing I found: my Bluetooth heart rate monitor could not connect to my favorite sports app :( previous Rom did work Vell. Is there a possibility to make a selection of Bluetooth driver in the installation process? So we could choose which to use.

  3. Dave@NeedRom




    02/06/2014

    Germany

    Did go back to the v41 ROM, there my Bluetooth Heartrate monitor works on all my fitness apps…





  4. 05/03/2014

    Viet Nam

    help: My installation failed " Your system partition must be more than 1000 Mb
    And you have a 641 Mb"

    • Dave@NeedRom




      02/06/2014

      Germany

      Follow the instruction on top of that page -> see spoiler: How_to_extend_the_system_partition

      Everything you need to know is written there by Vell, plz read and follow.





    • 05/03/2014

      Viet Nam

      I tried to install CWM 6.0.4.4 package System1Gb-DataStock.zip past but can not install it.

    • Dave@NeedRom




      02/06/2014

      Germany

      Could you install the 1gb system thingy correct? After it you need a restart into recovery, than you need to mount the internal sd card and plug your phone into a USB port of you pc or laptop. After it you will see a unformated external sd card, format it in fat 32. After this you are ready to install this Rom. Be sure to copy the Rom zip file to the internal sd card or external sd card. Install it and it should work.
      But I use twrp and not cwm.

  5. Vell




    08/16/2014

    Russian Federation

    MIUI7 6.4.14 v42 now released!

    [U] Base firmware changed to 6.4.14
    [U] Open Gapps update to pico-20160416


    miuiPro.ru – done
    miui.su – done





  6. 04/20/2016

    Germany

    Hi,

    my Zopo Scorpio 980 (2GBRAM / 32GB) brick.

    I execute with TWRP 2.8.0.0 the System1Gb-DataStock.zip (increases the /system partition up to 1GB, /data partition to 1.5GB).

    and TWRP format partitions System, Cache, Data automatic and reboot the Phone.

    Now, when i start the phone (vol+ + power) it depend (white screen with blue ZOPO Logo). What can I do?.

     





    • 09/21/2013

      Greece

      its a very soft brick man, dont worry. Just download the "official" rom for your phone, and with flashtools install the official rom. After that just try again to install miui.

    • Dave@NeedRom




      02/06/2014

      Germany

      Hello, 

      after you did a format via TWRP, did you reboot the system or into TWRP, because there is no system on it after formating the partitions. You need to install MIUI or another ROM first to boot it. A boot into TWRP should work after this procedure. Try to plug your phone to a USB Port while it is off. Than press Vol+ and Power at the same time until you see the Zopo logo. Release the buttons and TWRP should boot. Than you can install this great Rom.

      Any questions? Ask or PM :)





  7. 05/04/2013

    Singapore

    Finally got it to install (some how the only difference is that this time I install while plugged into the charging cable, but the previous failed install I had 100% battery).  However, I can confirm the bluetooth does not work.  The bluetooth speaker show up and i can try to press to connect.  It tried to connect but did not show "connect".  No sound while playing.  Thanks.

  8. Vell




    08/16/2014

    Russian Federation

    MIUI7 6.4.21 v43 now released!

    [U] Base firmware changed to 6.4.21
    [U] Open Gapps update to pico-20160423


    miuiPro.ru – done
    miui.su – done

     
  9. Dave@NeedRom




    02/06/2014

    Germany

    Thank you verry much Vell. Downloading now and will install it soon.

  10. Dave@NeedRom




    02/06/2014

    Germany

    Bluetooth Heartrate Monitor is working now, Thx verry much vell. As always great work.


Leave a Reply

You must be logged in to post a comment.