• Title: MIUI8 6.6.30
  • Listed: 07/02/2016 1:20 pm
  • ROM Version: 4.4.2
  • You must be logged for ROM download.


Overall Rating : 53


45987 total views, 1 today

41 Total favorites

  

MIUI8 6.6.30
DesktopFirst run settingsIn call UILockscreenMy MusicPermisionsShutdown menuSIM photo

Author adMember Info

Vell


DESCRIPTION


Project is closet!
Dave will continue to the next topic

Be careful when selecting the firmware version. set of languages interface is different!
See the "Language_included_in_MIUIv7:" spoiler!

Preface:
   I present to you port MIUI 7 with phone Xiaomi RedRice (HM2013023) for phones ZOPO C2/ZP980, C3, C7/990. Installation is using Aroma Installer. Multilingual build by xiaomi.eu team
   Firmware need an extended system partition 1Gb.
   Recomended recovery – TWRP 2.8.0.0 for C2/980, C3 for C7/990

Attention!
In all firmware when switching between HD and FHD mode after installing and running the firmware is not to panic, that the entire screen crooked, just reboot again.

How_i_make_itSelectShow
Language_included_in_MIUIv7:SelectShow
Language_included_in_MIUIv8:SelectShow
Known_issues_when_run_on_ZOPO_phones:SelectShow
Helpful_informationSelectShow
Special_thanks:SelectShow
Kernel_modification_descriptionSelectShow

Full changelog

Changelog:SelectShow
Terms_of_use_and_distribution:SelectShow
How_to_extend_the_system_partitionSelectShow

Description of the installation process:
New installation:
    1. Make sure again that you have Extended the System to 1.0 Gb.
    2. Recommended to install Recovery – TWRP 2.8.0.0 = for С2/980, C3 = = for C7/990 =
    3. Make a full backup.
    4. Copy the archive file of the firmware on the internal or external SD card.
    5. In TWRP Recovery do all wipes except flash drives.
    6. Necessarily restart Recovery.
    7. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    8. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.

Update a previous version:
    1. Copy the archive file of the firmware on the internal or external SD card.
    2. Make a full backup.
    3. Necessarily restart Recovery.
    4. Install the firmware. The installation process in detail accompanied by a dialog menu and additional information.
    5. Wipe a Cache / Dalvik cache
    6. After the system boots, do not rush to use the phone, give him a lie down for 5 minutes and then restart it.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to Vell


499 Responses to“MIUI8 6.6.30”







  1. 11/25/2013

    Belgium

    Grazie Redfox91.

    Con GPS Fix tutto ok. Ho dovuto aspettare 7 minuti, pero adesso funziona.

    For Vell : all is ok. GPS fixed. Thank you for the rom.

  2. Vell




    08/16/2014

    Russian Federation

    MIUI7 6.5.19 v47 now released!

    [U] Base firmware changed to 6.5.19

    miuiPro.ru – delayed
    miui.su – done





  3. 03/30/2014

    Spain

    Hello Vell,

    Your rom is really becoming famous!!

    I'm going to install in some minutes, but I'm using othe MIUI rom since 2 years ago. Do you believe I just can follow the instructions with no issue?





  4. 03/30/2014

    Spain

    Hello Vell,

    I got an installation error using V47: " failed to extract dir from "system" to "/system".  I wait for your news. Thanks.

  5. Vell




    08/16/2014

    Russian Federation
    make it a rule! if you copied the firmware in recovery, then reboot into recovery before installing




  6. 10/11/2013

    Italy

    Hi Vell,

    If I set the brightness to a minimum, the display turns off completely. Once I had to restore from recovery. You can increase the minimum brightness?

    Thanks Vell!

    • Dave@NeedRom




      02/06/2014

      Germany

      Hello redfox91,

      are you using the AutoBrightness function? If yes, try to swipe down to open the quick access menue and at the bottom of this there is a slider for the brightness, move it a little bit to the right so you set the minimum brightness of your phone by using the auto brightness function. 

      Maybe this little trick can help.

      Dave

    • Vell




      08/16/2014

      Russian Federation

      simultaneously press the menu button and the volume up





  7. 10/11/2013

    Italy

    Hi Dave,

    with automatic brightness, if I set the brightness to zero the display doesn't turns off. If I set the manual brightness, bringing the bar totally to the left the display switches off once again . I prefer to keep the manual brightness to avoid an increased battery consumption. 

    Thanks for your help :)

  8. Vell




    08/16/2014

    Russian Federation

    added to Helpfull information:

    If you set brigness at minimum and screen is off
        simultaneously press the menu button and volume up

  9. Vell




    08/16/2014

    Russian Federation

    MIUI7 6.5.26 v46 now released!

    [U] Base firmware changed to 6.5.26

  10. Vell




    08/16/2014

    Russian Federation

    v48 of course

    • Dave@NeedRom




      02/06/2014

      Germany

      So this will be the last Miui7 release befour Miui8.
      I hope, that you can port it to our zopo phone too, I mean, that will be awesome.
      I Thank you verry much Vell for your hard work you have done, to help us keeping our phone’s alive with awesome Miui.

    • Vell




      08/16/2014

      Russian Federation

      if miui 8 for your phone will be Android 4.4, it should be no problem

    • Dave@NeedRom




      02/06/2014

      Germany

      As far as I understood it correct, there will be Miui8 releases for the Redmi phones. So let’s hope that it is android 4.4


Leave a Reply

You must be logged in to post a comment.