- Title: Nubia LightX v3.79
- Listed: December, 2015
- Last modified: 03/09/2016 2:10 pm
- Version: LightX v3.79
You must be logged for ROM download.
23709 total views, 3 today
5 Total favorites
CUSTOM
Member Info
DESCRIPTION
Custom ROM LightX v3.79 (UI3.8) (Android v5.1.1).
Custom Rom LightX base on stock rom but much lighter faster and smooth.
Remove all Chinese junk apps (bloatware) - Clean install -
Better battery life.
This Rom is ONLY for ZTE Nubia Z7 Max.
ONLY FOR MERGED PARTITION.
Install:
1)Enter to TWRP Recovery v3.0.0.0.
2)Make full wipes. Wipe—> Advanced Wipe—> (Dalvik Cache – System – Data – Cache)
3)Install LightX v3.79.zip.
*If you see this error on install this rom (E: Error executing updater binary in zip) then reboot phone into TWRP Recovery and try to install the rom again.
(Rebooting between wiping and flashing ROM fixes the TWRP error E: Error executing updater binary in zip).
*Before installing this rom you should have preinstalled stock rom v3.22 with nubia tool.
*If have preinstalled CM12.1 or CM13 need to make full wipes and after install this rom LightX v3.70.
*Stock v3.22 here: https://www.needrom.com/download/nubia-z7-max-v3-22/
- – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – -
Install USB Drivers & Recovery:
1)Download (My Tool https://www.needrom.com/download/z7-max-all-in-one-tool-v1-1-0/ ) UnRAR and run it on your PC.
2)Press 1 to Install The USB Drivers
3)Turn On USB Debugging Mode To Your Phone.(How to: https://www.youtube.com/watch?v=ze7y8rPzH9w )
4)Connect your mobile (mobile to be active) to the computer and select number.
5)DONE.
—-WARNING:This Tool Works Only For Android v5 and v5.1.1 Lollipop—-
- – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – -
Root:
1)Download SuperSU v2.70.zip and put it to your internal storage.
2)Enter to TWRP recovery and install SuperSU v2.70.zip.
3)DONE.
- – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – -
Install Google Apps:
1)Download Gapps For Android v5.1.1 Nano 20160403.zip and put it to your internal storage.
2)Enter to TWRP recovery and install Gapps For Android v5.1.1 Nano 20160403.zip.
3)DONE.
- – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – -
- – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – -
How to Backup and Restore IMEI and MEID:
Try this Nubia Nubia emergency tool:https://www.needrom.com/download/nubian-emergency-tool-v1-0-6/
- – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – -
Τhanks very much the Russian forum 4pda.ru for this rom.
- – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – -
Please if you like my work Rate me with 5 Stars.
Thanks.
※Please make a backup of your device before installing or updating ROM
Have done full wipe and installed 3.77. Everything works well.
Just missing the Smart Lock function of Android 5.0. Any Idea how to make that work ?
Thanks you tigreos, your room works nicely. your roms are master pieces
Hi Tigreos, can I flash this (after full wipe) over CM13 directly? Or do I need to first install stock 3.22 or any other stock version? Also does mobile data work on this version? 3.77 had mobile data issues
Ok, found it myself by flashing directly. It works. The only issue is settings FC while booting the first time, You need to first flash only the ROM, let it boot and then root and flash gapps the next time.
i purchased an used phone with cyanogen rom, how would i know if the phone has merged partition in order to flash other roms?
If its Cyanogen 12.1 or 13 then its most likely merged paticion. Go to sttings and go to storage and you should see its only ONE Internal storage. Make a backup on TWRP just in case.
Hi~Tigreos!
How to enable smartlock?
google setup wizard FC!
Can i flash the 3.79 over the Cyano 12.1 whit the TWRP 2.8 ?
using this rom now on my nubia z7 max…find one problem..when i reset/format the hp..everthing is oki..then boot into nubia android os interface..then when in (step skip) simcard..its become error on apps..try many time still same.cant get in to home screen/menu interface android…
using this rom now on my nubia z7 max…find one problem..when i reset/format the hp..everthing is oki..then boot into nubia android os interface..then when in (step skip) simcard..its become error on apps..try many time still same.cant get in to home screen/menu interface android…everytime format in (setting)..need go to recovery TWRP reflash back the rom..and found in setting GPS..in (high accuracy)..some app cant detect a GPS like normal…
PROBLEM
1) select language menu appears and i select english
2) Then nubia service account appears and i select skip
3) then wifi settings appears and i select skip
4) and last time sim setup appears and it says setup has encountered setup error and closing.
and phone stays at lock screen i cant do anything main menu does not open.
how can i solve this anyone ?
this happen because of I GO TO SETTING then FORMAT/BACKUP then i format like normal ?
5) in GPS setting to (HIGH ACCURACY)..then some app cant detect LOC..no GPS..
PLS HELP..TQ!
overall this rom is GREAT FOR EVERYDAY USE!!!!!