DESCRIPTION

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.9.3
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now…
 Detected : MediaTek USB Port (COM71)
 Boot mode: Brom
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected…Please wait
 Sending DA agent, please wait…
 [emmi]EMMC CID: 150100464E58324D42
 —————————————————-
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : FE
 —————————————————-
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 —————————————————-
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E58324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait……
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM67)
 [system]Reading info, wait…
 Build ID: NRD90M
 Display ID: P5006A_MX_V1.0
 Version: 7.0
 Build Date: Wed Jul 12 17:30:22 CST 2017
 Model: P5006A
 Brand: Polaroid
 Device: P5006A
 Manufacturer: Polaroid
 FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
 Mediatek Version Release: alps-mp-n0.mp2-V1_esky6580.we.n_P22
 This phone have FRP partition.
 Wait untill phone will start charging.
 [0]All done.

———————————————————————————————————————–

PRELOADER
version: MTK_BLOADER_INFO_v21
name: preloader_esky6580_we_n.bin
CPU: MT6752
CUSTOM NAME: CUST
Flash style: EMMC
Flash definitions in preloader: 4
[1]Type: MCP(eMMC+DDR3) CID:  90014A483847316505
[2]Type: MCP(eMMC+DDR3) CID:  90014A483847346192
[3]Type: MCP(eMMC+DDR3) CID:  150100463732324D42
[4]Type: MCP(eMMC+DDR3) CID:  150100464E58324D42
load adress: 0x200d00
PRELOADER END

※Please make a backup of your device before installing or updating ROM