• Title: TWRP 3.3.1-0
  • Listed: 05/31/2019 2:50 pm
  • ROM Version: TWRP 3.3.1-0
  • You must be logged for ROM download.

Overall Rating : 4

1945 total views, 1 today

1 Total favorites


TWRP 3.3.1-0

Author adMember Info




TWRP Unoffical 3.3.1-0


- bugless

How to flash TWRP on your Cubot R9

1. be sure you are on offical Cubot R9 V15

2. turn your device off and don't plug usb cable on your device

3. download my twrp zip-file and also the SPFlash Tools on your PC

4. Extract the twrp-zip file and also the SPFlash Tool in C:\TWRP\

5. Start the SPFlash Tool and choose for "Scatter-loading file" the txt-file in extracted twrp-folder

6. now press top on "download"

7. connect your USB Cable from Cubot R9 to your PC

8. the programm will start automatically and flash the TWRP on your recovery partition

9. when it's done (green tick), unplug the usb cable and start the device once with VOL+ and Power at the same time. Choose in the boot menu "recovery"
It's important to do this step at the first boot, otherwise the Cubot Recovery will rewrite the parition and you need to do the steps again.

If you are once in twrp successfully, it will remain on your device.


Open Spoiler-tag to see the changelogs   

※Please make a backup of your device before installing or updating ROM

Donate with PayPal to seluce

One Response to“TWRP 3.3.1-0”

  1. 12/04/2018

    Russian Federation

    All is super!!!

    seluce very quickly and efficiently prepared a workable TWRP for the Cubot R9 for last version of firmware.

    Now it is possible to install root and backup system and so on.
    Thank you very much

Leave a Reply

You must be logged in to post a comment.