• Title: SN Write Tool FINAL
  • Listed: 08/20/2017 2:37 am
  • ROM Version: V1.1729
  • You must be logged for ROM download.

Overall Rating : 1

3149 total views, 1 today

4 Total favorites


SN Write Tool  FINAL

Author adMember Info


Unpack the SN Write tool zip file into a folder and run SN Writer as Administrator

[Image: how-to-use-SN-writer-1.jpg]

Under ComPort, select USB VCOM


[Image: how-to-use-SN-writer-2.jpg]

Under Target Type, select your type of device


[Image: how-to-use-SN-writer-3.jpg]

Click on System Config


[Image: how-to-use-SN-writer-4.jpg]

The System Config dashboard should pop up


[Image: how-to-use-SN-writer-5.jpg]

If you wish to write IMEI to the phone then tick IMEI under Write Option. Under IMEI Option, tick the appropriate option (mostly Dual IMEI) depending on the number of SIM card slots the phone has. For the rest like Bluetooth Address, Wi-Fi, Address etc, ticking the box in front of them is just enough


[Image: how-to-use-SN-writer-6.jpg]

Click the MD1_DB button at the bottom. In the Window that pops up, navigate to the location of the MD1_DB file (usually named like BPLGUInfoCustomAppSrcP_MT65**…..), select it then click Open


[Image: how-to-use-SN-writer-7.jpg]

Click the AP_DB button at the bottom. In the Window that pops up, navigate to the location of the AP_DB file (usually named like APDB_MT65**…..), select it then click Open


[Image: how-to-use-SN-writer-8.jpg]

Click Save at the bottom


[Image: how-to-use-SN-writer-9.jpg]

You should be back to the SN Write tool Home screen, click Start


[Image: how-to-use-SN-writer-10.jpg]

If you're writing IMEI, enter IMEI 1 and 2 then click OK


[Image: how-to-use-SN-writer-11.jpg]

If you're writing Bluetooth Address and it is something like bc:b3:08:4c:1f:99 then you simply type bcb3084c1f99 then click OK


[Image: how-to-use-SN-writer-11b.jpg]

If you're writing Wi-Fi Address and it is something like bc:b3:08:cb:c0:f6 then you simply type bcb308cbc0f6 then click OK


[Image: how-to-use-SN-writer-11c.jpg]

SN Writer should now display Start searching preloader com port and handshake. At this point, switch off the phone (still with battery inside) and connect it to the PC (do not hold any button on the phone) via a USB cord


[Image: how-to-use-SN-writer-12.jpg]

You should now see Start searching kernel com port and handshake, just sit back and don't interrupt the process


[Image: how-to-use-SN-writer-13.jpg]

You'll then see Start switch to MD meta and init Modem database. At this point, the phone will come on. Don't worry, SN Writer is simply booting it into Meta Mode


[Image: how-to-use-SN-writer-14.jpg]

Next, you'll see Start loop write data to nvram


[Image: how-to-use-SN-writer-15.jpg]

You should then see Start backup nvram to BinRegion, you're almost done


[Image: how-to-use-SN-writer-16.jpg]

You should new see a green PASS prompt. You can now disconnect the phone


[Image: how-to-use-SN-writer-17.jpg]


※Please make a backup of your device before installing or updating ROM

One Response to“SN Write Tool FINAL”

  1. 04/23/2013

    Why the FINAL? :)

Leave a Reply

You must be logged in to post a comment.