• Title: Tecno Spark 4 Lite FRP File and FRP Tool
  • Listed: 03/15/2020 11:33 pm
  • ROM Version: v1
  • You must be logged for ROM download.


Overall Rating : 0


292 total views, 1 today

  


Author adMember Info

deba7501981762


DESCRIPTION


Follow the full process to unlock frp from below frp file

  • First of all, Download all the files from the download section.
  • Once all the files downloaded extract the Tecno Spark 4 Lite FRP File and FRP Tool.
  • There you will see "2" files.
  1. SP Flash tool.zip.
  2. FRP Files folder.
  • Well now extract the SP Flash tool there.

Add DA File in SP Flash tool to frp bypass/ unlock tecno, MTK, Ulefone, ZTE, Myphone, all android

  • Once extracted, open the SP Flash tool extracted from the folder.
  • Now find there SP Flash Tool.exe, Then run the SP Flash tool.exe from there.
  • After that, click on the Download Agent tab, and give the file path of the Download Agent file (you can find it on Cubot P30 FRP File folder) and then press the open button.

Add Auth File SP Flash Tool to frp bypass/ unlock tecno, MTK, Ulefone, ZTE, Myphone, all android

  • Then click on the Scatter-loading, then give the file path of the Tecno Spark 4 Lite MTK Scatter file (File should be in the FRP file) folder and press the open.
  • Now go to the Format tab by click on the "Format" icon.
  • Then check the Manual Format from there.

click on manual format flash to frp bypass / unlock tecno, MTK, Ulefone, ZTE, Myphone, all android

 

  • Open the Tecno Spark 4 Lite MTK Scatter file.txt file in notepad that you select on the SP Flash tool.

  • Then open the notepad and press CTRL+F at the same time to open the Find option.

  • After that, find the keyword "FRP" there.

  • Now open the SP Flash Tool and replace the Begin Address and Format Length value with the Tecno Spark 4 Lite FRP file Scatter text FRP value.
  • Just copy the Linear_start_address value & paste it in the SP Flash Tool Begin Address field. and then Copy the Partition_size value & paste it in the Format Length field.
  • All files are now successfully selected, now you can format the FRP storage successfully.

Make Sure:- Before you connect your device you need to install MTK USB driver on your PC.

  • Then Open the "SP Flash Tool" and then click on the "Start" icon from there.

click on start button to FRP Bypass / unlock Tecno, MTK, ZTE, Ulefone, Myphone

  • Now Connect your Device.
  1. First Power Off your Device.
  2. Then connect your device to the computer using a good USB cable.
  • Then check on the MTK FRP Tool a green line will appear.
  • That's mean your device flashing will be started.

Note:- If your Tecno Spark 4 Lite not detected on the SP Flash Tool, Then reinstall USB Driver and restart your PC and then follow the whole process once again.

  • Once flashing finished, then you will get a pop-up window.
  • Then disconnect and power on your device.
  • Great, you have successfully done Tecno Spark 4 Lite FRP Bypass.


※Please make a backup of your device before installing or updating ROM


One Response to“Tecno Spark 4 Lite FRP File and FRP Tool”



  1. Ismailautd




    10/20/2019

    Good


Leave a Reply

You must be logged in to post a comment.