• Title: TWRP megthebest
  • Listed: 02/01/2016 10:18 pm
  • ROM Version: TWRP megthebest
  • You must be logged for ROM download.

Overall Rating : 21

8301 total views, 1 today

9 Total favorites


TWRP megthebest
TWRP megthebest - Image 1TWRP megthebest - Image 2TWRP megthebest - Image 3

Author adMember Info




Download and Install correctly Mediatek Preloader drivers

( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install:)





1- With flashtool load MT6753_Android_Scatter-TWRPPlay.txt MT6753_Android_Scatter-DARK.txt MT6753_Android_Scatter-TWRPClassic.txt (depends on which version you like)

2- Select download and connect smartphone to pc (smartphone must be powered off)…  in few seconds will start the process and the new TWRP will be flashed.

To restore original stock recovery, you need load ad point 1 the file  MT6753_Android_Scatter-Stock.txt

P.P.S to enter in the recovery, power off the smartphone, push VOL + and Power at the same time, you will see three words with VOL + you move selection, with VOL – you must select Recovery

During first boot of twrp, allow modification of system files, according to this screen (if you leave read only, you loose TWRP at second boot):


To have root flash with TWRP the archive supersu.zip found here: https://download.chainfire.eu/696/supersu/


PLEASE Donate if i help you and Support Me with 5 Stars!

※Please make a backup of your device before installing or updating ROM

Donate with PayPal to megthebest

26 Responses to“TWRP megthebest”

  1. 01/14/2016


    Working well!

  2. 11/07/2013


    thanks bro!

  3. 01/30/2016


    working well, you are the best

    • 11/07/2013


      thanks also to you for supporting me.. !

    • 10/25/2017


      hey, how did u manage to unlock the bootloader ?

      I ve been trying to install this rom but getting error merssages while flashing. I am abke to flash the stock rom but not via this TWRP.

      Can youy please lay down the propcedure. Much appreciated

  4. 02/02/2016


    Awesome :) Thank you :)

  5. 04/30/2015


    Meg can you please explain to me a bit more how  to restore stock recovery? "you need load ad point 1 the file  MT6753_Android_Scatter-Stock.txt"

    I would not like to do anything wrong and end up flashing the whole rom again. Thank you dear :-)

    • 11/07/2013


      hi, what is not clear? .. take a breath, install prealoader drivers correctly (like explained on the links) and you never loose rom or not necessary to reflash..

      Using the scatter provided, only affect recovery partition, no other data/apps are touched.

      Please be sure that drivers are correctly installed first!

  6. 04/30/2015


    Its all ok. I was just confused for a momment with "load ad point 1 the file". Thank you, works perfectly

  7. 03/04/2014


    I install correctly Mediatek Preloader drivers but then when i open flash tool and scatter file.txt i choose (for test i choose all the scatter files) the flash tool stock to processing and only with task manager close.

  8. 02/06/2016


    Somebody help me please.

    install correctly Mediatek Preloader drivers,and  TWRP flashed.(OK sign )

    But after select Recovery,lay down Droid appeared.How can I startup TWRP?



    • 11/07/2013


      Are you sure about the drivers correct installed? After flashing twrp, immediately enter on it, with power and volume +, select recovery with vol – and you boot into twrp. Allow changes when requested and you’ll neve have porblems in future with twrp

  9. 02/06/2016


    Dir megthebest.

    Thanks for reply. Actually,sometime flashed later,I wrong flashed it [firmware upgrade]mode. And then my power was Bricked.

    After Bricked,I flashed stockrom. So I told the drivers correct installed.

    Anyway I tried it another PC(win7) last night,I flashed it!!  Thank you so much!!


  10. 02/13/2016


    Hi meg, i've prepared everything, mediadrivers and such. But when i press download and plug in my powered down phone, it's not doing anything except charging. Any ideas?

Leave a Reply

You must be logged in to post a comment.