• Title: TWRP 3.2.3-0
  • Listed: 01/07/2019 2:50 am
  • ROM Version: TWRP 3.2.3-0
  • You must be logged for ROM download.

Overall Rating : 1

217 total views, 2 today


TWRP 3.2.3-0

Author adMember Info




TWRP Unoffical 3.2.3-0


- bugless

How to flash TWRP on your Cubot King Kong

1. be sure you are on offical Cubot King Kong V20

2. turn your device off and don't plug usb cable on your device

3. download my twrp zip-file and also the SPFlash Tools on your PC

4. Extract the twrp-zip file and also the SPFlash Tool in C:\TWRP\

5. Start the SPFlash Tool and choose for "Scatter-loading file" the txt-file in extracted twrp-folder

6. now press top on "download"

7. connect your USB Cable from Cubot King Kong to your PC

8. the programm will start automatically and flash the TWRP on your recovery partition

9. when it's done (green tick), unplug the usb cable and start the device once with VOL+ and Power at the same time. Choose in the boot menu "recovery"
It's important to do this step at the first boot, otherwise the Cubot Recovery will rewrite the parition and you need to do the steps again.

If you are once in twrp successfully, it will remain on your device.


Open Spoiler-tag to see the changelogs   

※Please make a backup of your device before installing or updating ROM

Donate with PayPal to seluce

3 Responses to“TWRP 3.2.3-0”

  1. 03/27/2017

    United States

    no work touchscreen in recovery mode

    • seluce



      try to flash stock recovery and install it with adb fastboot. 

      Some TWRP are buggy with some touchscreen driver. I don't use the King Kong, just ported the TWRP for some 3.18.35 devices (Cubot R9 works well)

  2. 02/09/2019

    hello anybody,

    im looking for a linux Lineageos or maybe other which would run on cubot king kong 3
    actually running kernel version is 4.4.95

    has anyone an idea or tested yet an rom version working on cubot king kong 3?

    thank you for your help!
    much appreciated

Leave a Reply

You must be logged in to post a comment.