Responses to “Unbrick Lenovo A850”

1. 

   12/12/2015
   

    

   phil112 on 08/30/2016 @ 2:45 pm

   I have Lenovo A850 one is brick and the other imei damage any fix and could the A850i rom work on the A850

   Log in to reply.
2. 

   12/26/2015
   

    

   bledarkoldashi on 09/02/2016 @ 2:43 pm

   yes you can unbrick it.

   For imei root the phone and install chamelphone to fix the imei

   Log in to reply.
3. 

   12/03/2015
   

    

   YimmyR on 09/05/2016 @ 4:56 am

   yes, unbrick my dead phone, before unbrick no turn on, now turn on but no boot android.

   how i do, or what rom install to return back my phone to stock rom and boot android completely.?

   please help me, i test so much rom for A850 and always Brick again my phone.

   Log in to reply.
   • 

     06/20/2016
     

      

     joseithox122 on 09/15/2016 @ 3:40 pm

     epa compa este rom sirve para el erorr tool dl image fail??
   • 

     06/20/2015
     

      

     aeros666 on 01/05/2017 @ 4:12 pm

     para el que prefunta por el error de imagen fail solo tienes que marcar la casilla "da dl al with check sum" y luego flashear la rom
4. 

   03/01/2016
   

    

   MaxDance on 09/14/2016 @ 1:27 am

   room original donde?

    

   Log in to reply.
   • 

     12/26/2015
     

      

     bledarkoldashi on 10/05/2016 @ 5:15 pm

     yes
5. 

   07/25/2015
   

    

   zackpower007 on 10/13/2016 @ 3:16 am

   how to flash..my A850 has stuck in logo..help me

   Log in to reply.
6. 

   06/27/2014
   

    

   cuve on 10/19/2016 @ 10:33 am

   My A850 full brick impossible to recover

   Log in to reply.
   • 

     10/25/2016
     

      

     glennritchiemiller89 on 04/24/2017 @ 7:03 pm

     nothing impposible to make your full bricked device running back..let me help u..follow my instruction….

     1.prepare a pc or laptop+usb cable+strong internet connection

     2.download usb driver,flash tools and an official firmware/stock rom

     3.extract all the file after its downloaded…

     4.run the flash tool,go to option,tick "high speed" and "with battery ",,,check the baudrate option it must on 11++++

     then click scatter file and choose the file from the firmware/rom that already extracted and click start or f9…now connect your device to your pc/laptop but you must press the power button+vol.up+vol.down+home button at the same time until you see a red line..wait untill a yellow line finish then a grey until complete by a green circle,,

     now disconnect your device from the usb and turn it on….the first boot take a little time for the device to running…

     enjoy back your phone…

      

     (tips:make sure your device battery still have at least 5% power to perform the installation)
7. 

   08/23/2016
   

    

   @luis1960 on 04/13/2017 @ 12:12 pm

   LINK ERROR

   Log in to reply.
8. 

   08/27/2015
   

    

   mmmarcos on 08/06/2017 @ 3:26 pm

   Thank you for your contribution. Please repair the link. Thank you

   Log in to reply.
9. 

   11/05/2016
   

    

   juan medina on 12/02/2017 @ 6:41 pm

   link caido

    

   Log in to reply.
10. 

    11/23/2016
    

     

    edwardxx4 on 02/23/2018 @ 4:36 pm

    enlace caido subirlo d enuevo por favor y avisar al estar listo gracias

    Log in to reply.