DESCRIPTION

1. If it is the first time to use this tool, you need to install the driver. install driver according to your PC type.

2. Open folder  ,find “flash_tool” as picture showed.  And run flash_tool.exe, then you will see the following picture one by one.

3. Load Scatter File:

4. After Successful Scatter Loading, your interface will be as below:

5. Shut down tablet, connect it with your PC, then click this "Download", and then use a needle to push "reset" button on tablet.

6. After clicking on Downlaod, Burn Starts: 

7. Burning succeed. A Confirm Dialog will appear

Unplug USB cable, and starting up your tablet. 

Enjoy!!!

Please Donate. It takes time to reorganize things. I will update this.

※Please make a backup of your device before installing or updating ROM